94 Cobra intake fit??

The lower is a bolt on. The 94-95 upper has a crook in it that places the throttle body at about a 45 degree angle.

Some manifolds may use an EGR adapter to create the crook that add the 45 degree angle. The Explorer manifold I have used one, so I bought a straight EGR adapter for a 70 MM TB and took care of that problem.
 
yes the 94-95 mustang need the elbow adapter if you are puting a 93 intake on. but the 94-95 cobra uppers, the adapter is part of the upper intake,

Yes I have a lower but its ported, I would like to keep it for my 95 GT, that y I would like to get a 94-95 upper for it,

the 93 upper will fit better with the throttle body off a fox, it was make for a fox, so let me know what you think.
 
Sounds like a dumb question but what would be the benefit of haveing the upper only. Not being a smart ass, I really dont know.
I may be interested in doing this, I dont know if the guy will release just the upper though. He might, tell ya what even if we dont do some kinda swap I can put you in contact with him, cool?
 
You need the lower 2 the cobra upper will not fit the stock lower. I was just saying that if you got the 94-95 lower&upper that we could trade the uppers. The 93 I got will fit a fox car better, and that 94-95 you are looking at will fit my 95 better.
 
This would be a good trade for both of you guys, RUNINAGT, I would suggest you do it, you would only be 200 into a Cobra intake, and a real 93 upper is worth a little $$$. Dont mess around trying to make the 94 intake fit your Fox, not worth the trouble....