• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

94 Cobra Running Awful Need Help

  • Thread starter Thread starter Cobra0213
  • Start date Start date Aug 4, 2017
C

Cobra0213

New Member
Aug 4, 2017
2
0
1
Aug 4, 2017
#1
  • Aug 4, 2017
  • #1
Hey guys i have a 94 cobra that is running awful. When i first get in after a cold start and start to drive there is barley any power when i am pressing the gas pedal. After about 10 or so minutes after its warm it drives a little bit better but still very noticeable. I have checked the fuel lines and have no leaks, new spark plugs and harness. There are no check engine lights on just a low coolant light but its always been on since before the issue. Need help any advice works
 

Davedacarpainter

Chicks can make things hard if they’re inspired...
SN Certified Technician
Nov 28, 2015
11,833
11,633
203
Discordia
Aug 4, 2017
#2
  • Aug 4, 2017
  • #2
Welcome to Stangnet.

Not all codes will flash a CEL.

I'll move your thread over to our '79-'95 tech forum. A guy named Joe will help you out. @jrichker He was probably smarter than me at two years old than I am at 55.

Good to have you with us. Show a picture or two of your ride, it's always good to see a cobra!
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Aug 4, 2017
#3
  • Aug 4, 2017
  • #3
Dump codes sticky

Look at the top of the 5.0 Tech forum where the sticky threads are posted. One of them is how to dump the computer codes. Codes may be present even if the CEL (Check Engine Light) isn’t on. You don’t need a code reader or scanner – all you need is a paper clip, or if your lady friend has a hair pin, that will do the job.
I highly suggest that you read it and follow the instructions to dump the codes. http://www.stangnet.com/mustang-forums/threads/how-to-pull-codes-from-eec4.889006/
 
You must log in or register to reply here.

Similar threads

Engine Coolant boiling in hose?
  • Teen'93stang5.0
  • Jun 3, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
153
Fox 5.0 Mustang Tech Jun 8, 2026
Mustang5L5
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
256
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
L
Engine Why won't the motor start if I have spark and fuel
  • LeviAnderson
  • Nov 20, 2025
  • Fox 5.0 Mustang Tech
Replies
3
Views
409
Fox 5.0 Mustang Tech Nov 20, 2025
AeroCoupe
C
Engine Cylinder 5,,7, & 8 run significantly cooler than the other cylinders
  • Crisfixes
  • Sep 27, 2025
  • Fox 5.0 Mustang Tech
Replies
1
Views
227
Fox 5.0 Mustang Tech Sep 27, 2025
Noobz347
F
Engine 1988 Foxbody idle issues
  • fernandosgarage55
  • Apr 28, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
26
Views
564
Fox 5.0 Mustang Tech Apr 30, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?