• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

94 Cobra running rough (PLEASE HELP!!!)

  • Thread starter Thread starter nos90gt
  • Start date Start date Apr 14, 2006
N

nos90gt

New Member
Nov 30, 2003
70
0
0
Central FL
Apr 14, 2006
#1
  • Apr 14, 2006
  • #1
(94 COBRA) Okay, here we go. About 2 weeks ago I started up my car and turned on the A/C and the car started to idle down and died. Started it up again and it was fine. Just the other day it did the same thing when slowing down to stop. Idle would go up and back down and stall. I thought it might be the IAC, so went to ford and bought a new one and one my way home the car started to run worst. It idles bad like I just installed a monster cam in it. I put on the IAC and reconnected the battery. Started it up and still ran like $hit. I check the plugs, cap, rotor. It has 40 psi of fuel at idle.

I went to 2 different shops and they plug into the inside one, nothing would come up. Where do I go from here? Could of the computer gone into limp mode? Also when you check for codes in a 94 do you hook up the scanner from the inside of the car or under the hood like on a fox body to the EEC plug? Thanks for any help you can give me. Scott insane6925@aol.com
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Apr 14, 2006
#2
  • Apr 14, 2006
  • #2
Not sure on how to pull the codes, as I stick to foxes.

There is a surging idle checklist sticky at the top of this forum, which should help you out. The first post is updated periodically.

You may have better luck with responses (especially with comuter stuff) in the 94-95 forum.
A moderator may be willing to move the thread for you?

jason
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Apr 14, 2006
#3
  • Apr 14, 2006
  • #3
Your car is plumbed for OBD-I and OBD-II. Your snake is OBD-I and uses the underhood connector. Contrary to many write ups, the test connector is on the passenger side (between the firewall and strut tower).

Get the codes yanked and go from there. Pay real close attention to EGR codes (EGR gasses at idle will cause near stalling, surging or actual stalling).

Good luck.
 
You must log in or register to reply here.

Similar threads

8
Foxbody high rpms and surging rpms
  • 86foxseth
  • Jun 9, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
356
Fox 5.0 Mustang Tech Jun 13, 2026
Noobz347
G
Idle surging after warm up
  • GALLY3309
  • Jun 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
255
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 10, 2026
Noobz347
J
Engine 4.6 Running rough at half throttle
  • jake411
  • Aug 3, 2026
  • SN95 4.6L Mustang Tech
Replies
5
Views
319
SN95 4.6L Mustang Tech Oct 20, 2026
DangStitches
D
S
Mach 1 iac valve in a 4.6 gt
  • solodriverz
  • Jun 3, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
179
SN95 4.6L Mustang Tech Jun 5, 2026
squeak93
J
Having fuel issues
  • Jbands2v
  • Nov 2, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
80
SN95 4.6L Mustang Tech Nov 2, 2026
LILCBRA
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?