hi i'm building a 94' with stock short block, GT40P heads(170LBS static presure on each cilinders), explorer intake ported, 65mm TB, 42pounders injectors, 80mm maff, stock cam, 1.7RR's, vortech S trim 10pounds of boost, 1 5/8 LT's, 2.5 pipe....
my problems are 2 that they are getting me pist off, 1 is i made a custom chip that my total timing is 24º (little retarded) and 10º base and im tired of hearing the engine nockling alot, i made a some changes i tok off the computer chip and i the spout off and put the timing on 20º static and i still hear pining what can i do?
2 the other one is i have no vac the vac is on 9 inches on 1000RPM's and i cheked all the vac lines and the car smells fuel and the gasket between both intakes is sealing, i cheked the valves again they ahve 1/4 turn after the pushrod stops what else can it be?
i really need help with this car....
my problems are 2 that they are getting me pist off, 1 is i made a custom chip that my total timing is 24º (little retarded) and 10º base and im tired of hearing the engine nockling alot, i made a some changes i tok off the computer chip and i the spout off and put the timing on 20º static and i still hear pining what can i do?
2 the other one is i have no vac the vac is on 9 inches on 1000RPM's and i cheked all the vac lines and the car smells fuel and the gasket between both intakes is sealing, i cheked the valves again they ahve 1/4 turn after the pushrod stops what else can it be?
i really need help with this car....
