While driving and taking a corner at around 15 my car just died. It would crank but would not start. I noticed I could not hear the fuel pump prime when i first turned the key to on. I checked the cutoff switch and it was not triggered. Once I got my car home i jumpered the fuel pump test connector and still could not hear the pump run. I decided since I still had the original pump in mine I would go ahead and change it. I dropped the tank and unplugged the electrical connector to the fuel pump. I decided to try and test the new pump so I fished it up into the trunk and plugged it into the new pump. I turned the key and could not hear the pump run. I jumpered the test connector and still nothing. Is this a valid test? Does the pump have to be in the tank to run for any reason?
If the new pump should have come on the next thing I am going to try is test the voltages in the pump circuit starting with the cutoff switch and the CCRM. Any other suggestions?
If the new pump should have come on the next thing I am going to try is test the voltages in the pump circuit starting with the cutoff switch and the CCRM. Any other suggestions?