• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

95 cam and injector questions

  • Thread starter Thread starter 1quik69
  • Start date Start date Feb 10, 2006
1

1quik69

New Member
Apr 2, 2005
38
0
0
Feb 10, 2006
#1
  • Feb 10, 2006
  • #1
I picked up a non running 95 cobra today for a decent price. What difference if any is there between th 95 GT cam and the 95 Cobra cam? What horsepower level are 19# injectors good to?
 

urban96

bubb rubb says:"woo woooooo"
Founding Member
Sep 24, 2002
3,464
1
69
Syracuse, NY
Feb 10, 2006
#2
  • Feb 10, 2006
  • #2
cobras come stock with 24# injectors. not sure about the cam tho
 

donkey_punch

New Member
Jan 16, 2004
565
0
0
northern****ingjersey
Feb 10, 2006
#3
  • Feb 10, 2006
  • #3
the cams are different by specification. but nothing crazy. and Urban is on the money about injectors.
 

donkey_punch

New Member
Jan 16, 2004
565
0
0
northern****ingjersey
Feb 10, 2006
#4
  • Feb 10, 2006
  • #4
this was taken from the Sticky: 94-95 GT/GTS/Cobra Specific FAQ Sheet thread.

Cobra Cam specs: Duration: 227°/Intake & 270°/Exhaust
Lift: .485/.485 Intake/Exhaust
Lobe separation: 118.5°

i believe this is the Stock 5.0 E8ZE-6250-CA, Valve Lift Intake w/1.6 rockers-.444,
Valve Lift Exhaust w/1.6 rockers-.444, Duration Intake (at .050)-204, Duration Exhaust (at .050)-204, Lobe Center-116, Emissions Legal-Yes
 

final5-0

Mustang Master
Apr 6, 2003
6,817
12
79
DFW Texas
Feb 10, 2006
#5
  • Feb 10, 2006
  • #5
donkey_punch said:
the cams are different by specification. but nothing crazy. and Urban is on the money about injectors.
Click to expand...

Just one more thing to know about this info which I agree with.

Those cam specs are so small .............

You'd never know the difference in performance by using the old seat of the pants dyno!

About those 19lb inj's

IMHO, at stock fuel pressure, they are done at about 250rwhp give or take a bit.

When it comes to fuel, it is better to have a bit left in reserve than to need a bit more and not have it.

Grady
 

cobramanphil

Member
Apr 13, 2004
36
0
6
Bay Area
Feb 10, 2006
#6
  • Feb 10, 2006
  • #6
I believe the cobra cam was a bit softer then the gt's. Not by much, but then again the cobras came with crane 1.7 roller rocker arms so that sort of made the difference up.
 
You must log in or register to reply here.

Similar threads

J
Engine Tuning...?
  • justadude07
  • May 30, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
186
Fox 5.0 Mustang Tech Jun 6, 2026
Blown88GT
D
Engine HO cam in non HO roller block ‘93 f150
  • DanC1993f150
  • Mar 21, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
289
Fox 5.0 Mustang Tech Mar 29, 2026
General karthief
L
95 gt engine vibration
  • lenzgt
  • May 11, 2026
  • 1994 - 1995 Specific Tech
Replies
6
Views
192
1994 - 1995 Specific Tech May 26, 2026
lenzgt
L
J
95 Cobra Trunks
  • Jeff R
  • Apr 17, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
192
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 17, 2025
Chythar
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
837
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?