• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

95 Cobra Intake Manifold

  • Thread starter Thread starter 95GTV8
  • Start date Start date Sep 3, 2005
Prev
  • 1
  • 2
First Prev 2 of 2

95COBRA241

New Member
Sep 3, 2005
339
0
0
Delray Beach, FL
Sep 8, 2005
#21
  • Sep 8, 2005
  • #21
tmoss said:
I would not port a Cobra upper - just the lower for the right applications. If you need more than ~250cfm of flow that a ported lower/stock upper Cobra gives (and you can REALLY use it!) then step up to an aftermarket intake with a larger cross section.
Click to expand...

I have researched this for several days now and I can't seem to find what the flow rate of an unported TFS street or track heat intake. Which out of the box intake with a larger cross section will flow more than the ported lower/stock upper Cobra's 250 cfm? I don't want to choke my 347, and its going to be 90/10 street/strip. And I do want to use a hi-rev (over 6500rpm) cam to have to use a box style intake like the TFS Box-R.
 

tmoss

Gettin Wired
Founding Member
Jun 28, 2001
7,153
32
128
Saint Louis, MO
Sep 8, 2005
#22
  • Sep 8, 2005
  • #22
The 192cc 2.02/1.60 64cc chamber Street Heats Peak out at ~ mid 250cfm range @ .600" lift.

You want flow from the intake to be the same to about 5% more than the head imo.
 

95COBRA241

New Member
Sep 3, 2005
339
0
0
Delray Beach, FL
Sep 8, 2005
#23
  • Sep 8, 2005
  • #23
Thnx,

So I guess I'll be o.k. with 61 cc T/w heads and custom ground cam with a max lift just under .600 ( and of course the ported cobra intake).
 

xr8d302

I bought a 27" monitor to compensate for my lack o
Apr 29, 2004
1,113
0
36
Medicine Hat, AB
Sep 8, 2005
#24
  • Sep 8, 2005
  • #24
mytight95 said:
tom are you talking about removing the actual port wall between the number 1&5 cylinders...... i saw that done on a stock intake someone posted a while back...... You think it would actually work?



jason
Click to expand...

Jason, you're talking about me, with the milled out runner walls. Let's get a pic here....


Now...note the first two, and the last two runner walls are missing. Sorry for not understanding, paul, but which of the runners are 1 and 5. Then, what are the other two that the wall has been milled out between?
 

Attachments

  • HPIM1319.webp
    40.6 KB · Views: 162

95CobraMike

Active Member
Apr 12, 2004
1,046
0
36
Lima OH
Sep 8, 2005
#25
  • Sep 8, 2005
  • #25
xr8d302 said:


Now...note the first two, and the last two runner walls are missing. Sorry for not understanding, paul, but which of the runners are 1 and 5. Then, what are the other two that the wall has been milled out between?
Click to expand...


front runners are 1 and 5 back runners are 4 and 8
 

Attachments

  • HPIM1319.webp
    40.6 KB · Views: 145

tmoss

Gettin Wired
Founding Member
Jun 28, 2001
7,153
32
128
Saint Louis, MO
Sep 8, 2005
#26
  • Sep 8, 2005
  • #26
I took a look at valve events for my mild cam to see how intake valve events in adjacent runners coincided. Cams with more durtion would have even more intake valve overlap, so the stock cam is a good "base" to compare from. Here is a pic of my quickie spreadsheet and the conclusions I drew. Open for review if I made a mistake & discussion.............
 

mytight95

Active Member
Apr 11, 2003
2,605
0
46
Dothan,Al
Sep 9, 2005
#27
  • Sep 9, 2005
  • #27
yup that was you....... man thanks for the pics.......



jason
 
9

95five-oh

New Member
Jun 25, 2006
158
0
0
Mount Airy, MD
Oct 3, 2006
#28
  • Oct 3, 2006
  • #28
Cobra intake worth the co$t?

My car is bone stock internally with about 150k on the engine (still runs great, no smoke). Will a cobra upper/lower intake plus a 70mm tb and a larger maf/air intake provide a noticeable gain? eventually i want to get heads and an e-cam but for now thatll be it. i know this is what the origional poster basically asked but since my car has such high mileage i thought i'd ask again.
Thanks.
 

95GTV8

New Member
Jul 25, 2005
386
3
0
Washington State
Oct 3, 2006
#29
  • Oct 3, 2006
  • #29
digging up my old threads i see

You will notice a gain on the cobra intake. I could feel a gain from 3500 and up. I'm not sure if you need a bigger MAF. I would wait on that untill you do the heads/cam.

If your car is still running strong i don't see any problems by you putting on the intake/tb.
 
9

95five-oh

New Member
Jun 25, 2006
158
0
0
Mount Airy, MD
Oct 4, 2006
#30
  • Oct 4, 2006
  • #30
95GTV8- Where did you purchase your intake from? i've seen the cobra upper/lower for around 430ish new, but that seems high considering the prices of high flow aftermarket intakes are only slightly higher. Did you purchase yours new or second hand? Thanks again for the help.
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

Resolved 1999 cobra removed lower intake manifold to crossovertube
  • hvcobra99
  • Sep 6, 2026
  • SVT Tech Forum
Replies
0
Views
166
SVT Tech Forum Sep 6, 2026
hvcobra99
J
SN95 Hello new to this app
  • James S
  • Jun 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
196
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 11, 2026
Habu135
J
Intake
  • James S
  • Jul 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
10
Views
305
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 12, 2026
James S
J
Engine 95 GT and 95 Cobra sensors and TB gasket
  • Sonic
  • Dec 21, 2025
  • 1994 - 1995 Specific Tech
Replies
1
Views
436
1994 - 1995 Specific Tech Dec 23, 2025
WhiteCobra95
E
4.6l auto to 5.4l 6 speed
  • EastanF5
  • Jan 22, 2026
  • SN95 4.6L Mustang Tech
Replies
0
Views
255
SN95 4.6L Mustang Tech Jan 22, 2026
EastanF5
E
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?