Fuel 95 mustang 3.8l v6 fpdm location

wmburns said:

I have some bad news for you. You could be looking for a looooong time to find the FPDM on a 1995 Mustang. Why? Because the 1998 and older model year Mustangs use a return based fuel system. A FPDM is used on a return-less fuel system (1999+).
IMO you should start with the basics. By basics I mean Powers and grounds. Confirm that you see +12 volts at the trunk mounted IFS cut off switch at initial key on. IF there is power at the IFS switch, this confirms that the CCRM and PCM are working together at some level. This also means the likely problem is a bad fuel pump. Do you HEAR it run at all?

Click to expand...

Joejr2227 said:

I’ve already replaced the fuel pump and it’s still not getting any power I’ve read on some other things that it could be a bad CCRM but when I turn The key on I do here at the clicks in the CCRM

Click to expand...

Joejr2227 said:

95 mustang 3.8l v6. I’ve been looking online for the past two days on where to find the fuel pump driver module and I can’t seem to find anything online on where it’s located. I was driving my car last week and it died Out I was able to restart it drove for another 10 minutes and then it died out and wouldn’t restart it just kept cranking and cranking and cranking and nothing found out I have no fuel pressure the fuel pump isn’t kicking on the CCRN clicks when I turn the key over to on there’s no blown fuses and the only other thing I could think of is the fuel pump driver module if anyone can tell me where that’s located it would be greatly appreciated

Click to expand...

Joejr2227 said:

I’ve already replaced the fuel pump and it’s still not getting any power I’ve read on some other things that it could be a bad CCRN but when I turn Nikita on I do here at the clicks in the CCRM

Click to expand...