• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

96 Explorer 5.0 Engine?

  • Thread starter Thread starter Jrock909
  • Start date Start date May 1, 2007
J

Jrock909

Member
Mar 6, 2007
36
0
6
May 1, 2007
#1
  • May 1, 2007
  • #1
Is this true....

Quoted from a guy on Stangnet.com!!!
if you used the lower intake off the explorer motor then you didnt put the ACT SENSOR back in... cause the explorer motor doesnt have the ACT (AIR CHARGE TEMP SENSOR IN THE LOWER... they put it in the air box ... and if you put yours in the air box... the computer will not read correctly.. you will need to drill and tap the hole in the lower intake to mount that sensor... could be a huge problem for you... also you used 1.7 rockers.. I personally see that being a problem..... I for one have had numerous problems with 1.7s and not shimming the rocker for the proper adjustment... I understand everything thinks just bolt the down and torque them to 30ft lbs and be done.. but once the engine fires and builds oil psi.. the lifters pump up and now you have valves hanging open just enough to give you false compression readings... which would also give you bad vaccume readings... just do the checks and check that ACT SENSOR ...

I relocated my ACT sensor to this spot on my CAI intake setup, would this cause my motor to load up at idle? Do the 1.7 roller rockers cause issues with speed density.... I am only getting around 13-15h/gi at idle when warmed up and I am starting to think the HO cam being that I advanced it 4* from being straight up...

 
You must log in or register to reply here.

Similar threads

Strange timing issue
  • 92 Bimini Blue
  • Sep 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
22
Views
739
Fox 5.0 Mustang Tech Oct 20, 2026
rednotch
D
For Sale 1993 Mustang LX for parts or restore
  • diesel farmer
  • Oct 6, 2026
  • Fox Body Mustangs For Sale (1979-93)
Replies
0
Views
419
Fox Body Mustangs For Sale (1979-93) Oct 6, 2026
diesel farmer
D
D
Running both lean and rich with O2 heat codes
  • Danceswithfire5
  • Aug 30, 2026
  • SN95 V6 Mustang Tech
Replies
1
Views
181
SN95 V6 Mustang Tech Sep 5, 2026
apple99Mustangdude
A
J
MEED HELP!! 86 mustang
  • Jacob0121
  • Jan 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
492
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 25, 2026
CAMTWO1070
S
Fuel ‘88 GT Runs Rich Cold — Fixes Itself When I Unplug Sensors (ECT, MAF, O2, etc.)
  • Sufarry
  • Nov 6, 2025
  • Fox 5.0 Mustang Tech
Replies
12
Views
1K
Fox 5.0 Mustang Tech Nov 9, 2025
Mustang5L5
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?