98 GT Key Fob (Keyless Entry)

S

soonerfever

New Member

Jul 25, 2006

47

1

0

Aug 11, 2007

#1

• Aug 11, 2007

• #1

Does anyone know how to program a key fob on a 98 GT? I have two fobs, one is programed and the other isn't.

 

B

bdcardinal

tree hugger

Jun 10, 2003

3,612

16

69

42

santa barbara, CA

Aug 11, 2007

#2

• Aug 11, 2007

• #2

go to the dealer. you need a scan tool to do it.

 

B

BobHyatt

New Member

Aug 7, 2007

378

1

0

Aug 11, 2007

#3

• Aug 11, 2007

• #3

I was under the impression that if you have one that works, adding a second is user-doable. I don't recall the procedure, but I do remember seeing it somewhere, perhaps in the owner's guide?

 

B

bdcardinal

tree hugger

Jun 10, 2003

3,612

16

69

42

santa barbara, CA

Aug 11, 2007

#4

• Aug 11, 2007

• #4

if you have 2 then you can add more. if you just have one it needs to be programmed. i just did mine.

 

C

chuck943

New Member

Oct 26, 2002

262

0

0

north carolina

Aug 11, 2007

#5

• Aug 11, 2007

• #5

Turn ignition to RUN or ACC. Momentarily jump pins in programming connector located In LR qtr panel area(taped to harness will have W/Y and GY/Y wires). All doors will lock then unlock to confirm programming mode. Press any button on 1st transmitter. Door locks will cycle to confirm programming. Press any button on 2nd transmitter (up to 4 transmitters total possible). Turn ignition to OFF. Locks will again cycle to indicate end of programming mode.