• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

A/C problem

  • Thread starter Thread starter super302
  • Start date Start date Jun 29, 2005

super302

I'd do anything for free Bapples
May 29, 2004
2,878
1
0
Davenport, IA
Jun 29, 2005
#1
  • Jun 29, 2005
  • #1
Today i turned on the A/C and it came out where teh heat usually comes out (by windshield AND floor), i turned it to 'vent' and same thing happened, the other day it was coming out of the reg. place (front 4 vents that point directly at you)

Anyone know what could cause this

-Patrick
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Jun 29, 2005
#2
  • Jun 29, 2005
  • #2
Check the small vac lines that run from the firewall tree over to the passenger side of the car in the engine bay. If all is well then you'll need to crawl up under the dash and check the vac lines there as well (where they run through the firewall to the diaphram motor).
 

super302

I'd do anything for free Bapples
May 29, 2004
2,878
1
0
Davenport, IA
Jun 29, 2005
#3
  • Jun 29, 2005
  • #3
Daggar said:
Check the small vac lines that run from the firewall tree over to the passenger side of the car in the engine bay.
Click to expand...
I bet thats it, i was "Test fitting" my STB and prob. disconnected a line on accident, thanks
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Jun 29, 2005
#4
  • Jun 29, 2005
  • #4
super302 said:
I bet thats it, i was "Test fitting" my STB and prob. disconnected a line on accident, thanks
Click to expand...

NP... let us know how it turns out.
 

super302

I'd do anything for free Bapples
May 29, 2004
2,878
1
0
Davenport, IA
Jun 29, 2005
#5
  • Jun 29, 2005
  • #5
Found the problem, a very tiny black "tube" snapped in half, now i have to tape it back together, lol
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Jun 29, 2005
#6
  • Jun 29, 2005
  • #6
Iv'e had one or two of those myself. Get a short length of 1/4 in. rubber vac line and slide the two broken ends in each side. Good as new.
 

super302

I'd do anything for free Bapples
May 29, 2004
2,878
1
0
Davenport, IA
Jun 29, 2005
#7
  • Jun 29, 2005
  • #7
Daggar said:
Iv'e had one or two of those myself. Get a short length of 1/4 in. rubber vac line and slide the two broken ends in each side. Good as new.
Click to expand...

eh...i used the poor mans/retarded teenager way, used electrical tape, works perfect.

Thanks daggar
 

CManT1914

New Member
Feb 5, 2004
3,172
2
0
Killeen, Texas
Jun 29, 2005
#8
  • Jun 29, 2005
  • #8
super302 said:
eh...i used the poor mans/retarded teenager way, used electrical tape, works perfect.

Thanks daggar
Click to expand...

I slid a larger piece over my hose when it broke, THEN electrical taped the crap outta it. It's held up for over a year now. I just posted some pics of the line for gcom over on the 94/95 side about an hour or so ago. lol
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
Jun 29, 2005
#9
  • Jun 29, 2005
  • #9
Yeah mine broke at the A/C label on the firewall tree. A big hose comes off of it and a smaller line (like you said) slides in it. I accidently pulled it out and just put it back in after I had the same problem.
 
You must log in or register to reply here.

Similar threads

B
A/C Issues
  • Boats90GT
  • Jun 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
197
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 11, 2026
Mcmahst
E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
3
Views
354
2005 - 2009 Specific Tech Sep 26, 2026
manicmechanic007
N
Need stainless carb heat shield
  • newmex999
  • Aug 29, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
2
Views
197
1965 - 1973 Classic Mustangs -General/Talk- Sep 13, 2026
Mcmahst
T
Drivetrain TREMEC TKX 1–2 Grinding Issue at ~4,000 Miles + Poor Warranty/Customer Service Experience
  • Ttopfoxguy
  • Oct 10, 2026
  • Fox 5.0 Mustang Tech
Replies
5
Views
312
Fox 5.0 Mustang Tech Oct 15, 2026
JMG9350
J
P
2000 GT Random Power Loss
  • Pinellas50
  • Mar 9, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
435
SN95 4.6L Mustang Tech Mar 23, 2026
Pinellas50
P
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?