• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

A/F guage question

  • Thread starter Thread starter woodyy24
  • Start date Start date Feb 29, 2008

woodyy24

New Member
Mar 30, 2005
290
0
0
illinois
Feb 29, 2008
#1
  • Feb 29, 2008
  • #1
originaly carbed car with no 02 sensors. not looking to go wideband right now. what should i do? just get a single wire sensor? what side should i put it in?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Feb 29, 2008
#2
  • Feb 29, 2008
  • #2
Save you money for a real wide band A/F gauge. The ones that use the stock O2 sensors are of little pratical use.

The A/F gauges that use the O2 sensor signal will jump all over the place. The reason is that the O2 sensors "switch" between
.2 volt lean and .6 volt rich with a curve that looks like the drop off a high cliff. The curve is almost straight up and down, so the
voltage shoots from .2 to .6 and back down . again 2 or more times a second at cruse. You won't get much useful information
except when the mixture is extremely lean or extremely rich, there is no middle ground.

Use 43 (Dark Blue/Lt Green wire) or pin 29 (Dark Green/Pink wire ) on the computer. Use Wire tap-ins from Radio shack P/N 64-3052.
The computer is located under the passenger side kick panel. That keeps you from having to crawl under the car and make a weather proof splice in the wiring. You can use either one, or run a SPDT switch and use both. Then you can use the switch to select which side to view.




See the following website for some help from Tmoss (diagram designer) & Stang&2Birds (website host)

Computer, actuator & sensor wiring
http://www.veryuseful.com/mustang/tech/engine/images/88-91_5.0_EEC_Wiring_Diagram.gif

New AutoZone wiring diagrams

http://www.autozone.com/az/cds/en_us/0900823d/80/16/71/3c/0900823d8016713c/repairInfoPages.htm for 79-88 model Mustangs

http://www.autozone.com/az/cds/en_us/0900823d/80/19/59/5a/0900823d8019595a/repairInfoPages.htm for 89-93 model Mustangs

http://www.autozone.com/az/cds/en_us/0900823d/80/1d/db/3c/0900823d801ddb3c/repairInfoPages.htm for 94-98 model Mustangs
 

woodyy24

New Member
Mar 30, 2005
290
0
0
illinois
Feb 29, 2008
#3
  • Feb 29, 2008
  • #3
no computer. its got an MSD 6al MSD dizzy and a carb.
 
You must log in or register to reply here.

Similar threads

A
A/F ratio gauge install questions.
  • AngryH58
  • Sep 24, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
247
1996 - 2004 SN95 Mustang -General/Talk- Oct 22, 2026
Noobz347
A
Blow through intercooled questions
  • AngryH58
  • Aug 31, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
289
1996 - 2004 SN95 Mustang -General/Talk- Sep 1, 2026
AngryH58
A
Engine Vacc leak detector
  • Creomod
  • Jul 19, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
219
Fox 5.0 Mustang Tech Jul 25, 2026
Mustang5L5
2
Adding subs with mach 460 system
  • 2v.cjmullis
  • Sep 29, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
157
1996 - 2004 SN95 Mustang -General/Talk- Sep 29, 2026
gkomo
Electrical Code 29 again
  • Creomod
  • Jul 31, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
392
Fox 5.0 Mustang Tech Aug 3, 2026
Creomod
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?