Engine AC bracket paint colors?

While I think the black looks good, I have a can of cast grey and will see what that looks like....

Best answered with more pics...... I am moving towards painting the Valve covers black or Ford blue.......
AC brackets are painted "Cast" grey for a test look......

Potomus Pete said:

Man, your a wiring genius.

Click to expand...

Just like my starter motor bolt abilities.......

Potomus Pete said:

Man, your a wiring genius.

Click to expand...

The wiring looks worse than it is... It is the stock wiring with the cover/loom removed.. I was tracing some wires and looking at what needed replacing when I removed the cover....
I found a wire that the insulation had come off of. It was really weird as the insulation was mostly gone and the wire was tarnished.. I wanted to check all of them. Only one like this so far.... Wire was to the low pressure switch on the AC dryer from the engine harness connector.. Part of the WOT shut off system.... for those with enquiring minds.....

rednotch said:

looks good, After seeing what the local parts stores wants for a can of duplicolor

Click to expand...

I know what you mean.. Paint here went up $2-3 a can over nite....
FJB