• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

adjustable fpr - pro's and cons?

  • Thread starter Thread starter 90lxfoxbody
  • Start date Start date Jan 31, 2006
9

90lxfoxbody

Member
Jan 11, 2006
264
0
16
Jan 31, 2006
#1
  • Jan 31, 2006
  • #1
has anyone here installed an adjustable fuel pressure regulator on a mildly built 5.0? if so what are the pro's and cons? will i see any noticable improvements on a car that isn't seriously modified? also how did you adjust it to suit your car? thanks.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Jan 31, 2006
#2
  • Jan 31, 2006
  • #2
90lxfoxbody said:
has anyone here installed an adjustable fuel pressure regulator on a mildly built 5.0? if so what are the pro's and cons? will i see any noticable improvements on a car that isn't seriously modified? also how did you adjust it to suit your car? thanks.
Click to expand...

subscribing

just cause I want to see that avatar again
 
9

90lxfoxbody

Member
Jan 11, 2006
264
0
16
Jan 31, 2006
#3
  • Jan 31, 2006
  • #3
yes the half naked chinese chick is worth a second glance.

ting tow hay boo-tay. 'nuff said.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 31, 2006
#4
  • Jan 31, 2006
  • #4
It is not a bad thing. You will be able to get a little richer at WOT, but that is about it while fairly stockish.
 
G

gt90stang

New Member
Dec 7, 2002
568
0
0
Jan 31, 2006
#5
  • Jan 31, 2006
  • #5
An APR will only allow you to push (act like larger ones) your injectors if they are marginal. The PCM will adjust for idle and normal closed/open loop operation. If you have plenty of injector then you don't need one. I run a stock FPR with my setup and 42# injectors, works great with my Tweecer tune.

Don
 
9

90lxfoxbody

Member
Jan 11, 2006
264
0
16
Jan 31, 2006
#6
  • Jan 31, 2006
  • #6
hmm, that makes me think that an adjustable fpr would be a good idea for running with laughing gas, since it lets you run a tad richer at wot. i just ordered a set of newly rebuilt e7te's with a three angle valve job and 1.7 roller rockers. after i put 500 miles on them i plan on spraying them with a zex kit.
 
You must log in or register to reply here.

Similar threads

Trick Flow Series R to Box R Upper Intake Road Block
  • Habu135
  • Mar 31, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3 4
Replies
78
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 6, 2026
Habu135
S
  • Locked
Drivetrain Adjustable clutch cable questions
  • Scott_S
  • Oct 31, 2025
  • Fox 5.0 Mustang Tech
Replies
6
Views
552
Fox 5.0 Mustang Tech Oct 31, 2025
Noobz347
Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
730
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
N
Vibration after new clutch
  • nipple_looker
  • Sep 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
733
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 26, 2026
fasterthangas
F
1
Crank no start on a turbo and cammed pushrod 5.0
  • 1630stri
  • Sep 2, 2026
  • Digital Self-tuning Forum
Replies
2
Views
214
Digital Self-tuning Forum Sep 16, 2026
Qtrhrse23
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?