i bought some control arms for my 89 LX and the day before i tried to put them on, my starter went out. so i replaced it and it still clunks once the vehicle fires up. it just grinds now and my flywheel looks horrible. so i drove it to my dads and put it up on jacks. im gonna replace control arms and well im back there put new coil springs and shocks. well since i did those on the back im gonna put new springs and shocks on the front. then to fix the starting problems ill replace starter cylinoid and flywheel. and as long as im doing flywheel ill replace clutch. i already read the thread on the clutch/flywheel replacement and know how to do it and all the little things to replace in there. also my engine is idleing wierd its kinda of "sputtering" and the floor boards rumble when i rev up. this is because i replaced drivers side motor mount and still have passengers side to do (I hope thats why its rumbling) i dont understand the idle problem. i recently put bosch platinum spark plugs in (oops) is that the idle problem maybe? finally when i push-start it and finally stop it there is a burning smell. (starter/flywhell grinding maybe?) as long as my car is in pieces does anybody have any suggestions on what else to replace to fix my problems? any input on anything would be great.