afr vs trickflow

shelbe67 said:

I am thinking about buying the trickflow setup as its ll matched.

Click to expand...

Not a bad idea. Matched is the keyword.

But I am also thinking about going afr 185.ifI do what cam do I use?

Click to expand...

1-800-ED-CURTIS. Okay, that's not his number. Go to his website www.flowtechinduction.com. Custom cams are cheap for what you get.

I have a 70 mm tbody, and track heat intake already, I also have a vortech s trim, I would love to get a custom cam but cannot afford it

Click to expand...

You cannot afford a custom cam, but you can afford to go with AFR185's? We're talking about a $100 premium to get expert advise for the most important part of your combo.

so Iwould just like to know what ofs cam would be good.

Click to expand...

Nobody here has enough knowledge to give you anything more than opinion, usually based on very limited experience. There is a reason people pay extra for custom cams, ya know.

Also I wanna use longtubes I have done the foxbody tbody swap so what headers could I use?

Click to expand...

The difference between Fox headers and 94/95 headers is that the 94/95 ones have an EGR bung. Physically, either will fit.

Dave