AIC trouble

BigPonyMan · Aug 2, 2005

IAC trouble

So my idle air control valve is on its way out again. I was wondering if there was a place I could get a replacement and fix this problem myself. How hard is it to install. I had the dealer replace the last one under warranty and the job only lasted a year and a half maybe 2 at the most. Any info is appreciated.

hotmustang331 · Aug 2, 2005

Um, i think that autozone sells them . make sure it comes with a gasket. Its SUPER easy to remove the IAC. Mine hasnt went out but we removed it when we changed plenums (obviously). I think they are around $50.
Also clean the old gasket off of the plenum.

Buckman · Aug 2, 2005

BigPonyMan said:
So my idle air control valve is on its way out again. I was wondering if there was a place I could get a replacement and fix this problem myself. How hard is it to install. I had the dealer replace the last one under warranty and the job only lasted a year and a half maybe 2 at the most. Any info is appreciated.

http://www.parts.com/partlocator/in...ake=10&model=Mustang gt&year=2001&catalogid=1

I prefer OEM on most newer (replacement) emission and fuel injection parts. OEM usually supplies upgraded or "improved" designs a lot faster than most of the part stores.

hotmustang331 · Aug 2, 2005

Are the IACs at the stores remanufactured too? Dang, I thought they were new. We have had more problems with remanufactured parts....its amazing how much longer new parts last. So I retract my statement...go to www.modulardepot.com and go to the ford parts section. Randy will get you one.

BigPonyMan · Aug 2, 2005

wow I didn't really want to pay $70 for something that's going to go out every 2 years. Is that normal? Could the dealership have put a remanufactured one or some other bs last time?

mustang70 · Aug 2, 2005

Autozone has them for $50. I'm pretty sure they're not remanufactured since there's no core charge.

four.six · Aug 2, 2005

BigPonyMan said:
So my idle air control valve is on its way out again. I was wondering if there was a place I could get a replacement and fix this problem myself. How hard is it to install. I had the dealer replace the last one under warranty and the job only lasted a year and a half maybe 2 at the most. Any info is appreciated.

i paid $37 for a new IAC last night at advance auto parts... it even came with a 1 year warranty. it took me about 2 minutes to change, very easy. i can upload pics if you dont know where the IAC is located at.. it is just 2 bolts. just let me know.

BigPonyMan · Aug 2, 2005

yes, please. I'd love to see pics just to make sure I'm doing the right thing.

four.six · Aug 2, 2005

BigPonyMan said:
yes, please. I'd love to see pics just to make sure I'm doing the right thing.

alright, i dont get off of work untill 11pm cst. thats like in an hour and 20 minutes. after i get home i will get some pics uploaded.

forpit2000gt · Aug 2, 2005

Iac is bolted on the front of the upper plenum. It is held on by two blots and is horizontal, cylinder shape with a plug on the left side. When you purchase one , you will see it.

four.six · Aug 3, 2005

BigPonyMan said:
yes, please. I'd love to see pics just to make sure I'm doing the right thing.

sorry man, my girlfriend has my camera. ill get it back tomorrow.

UhadMEatGT · Aug 3, 2005

What are the symtoms of an IAC problem??

Kilgore Trout · Aug 3, 2005

UhadMEatGT said:
What are the symtoms of an IAC problem??

Rough idle, decreased performance, and when it gets really bad the car will die when you let off the gas.

SilverHorse · Aug 3, 2005

Take it off and spray carb cleaner in it. This only works for so long but it has for me, twice.

BigPonyMan · Aug 3, 2005

four.six said:
sorry man, my girlfriend has my camera. ill get it back tomorrow.

No biggie, just whenever you can is fine with me.

So as for my other Q, is it normal fro the IAC valve to only last for a couple of years and then die?

Jinx · Aug 3, 2005

BigPonyMan said:
So as for my other Q, is it normal fro the IAC valve to only last for a couple of years and then die?

On the Stang, I wouldn't think so. The one on my other Ford lasted 11 years.

Edit: As for spraying it with carb cleaner... You stand a good chance of ruining the internals with a harsh cleaner (been there done that). However they do make carb cleaners that are sensor safe. So if you choose to clean vs. replace just use a cleaner that is sensor safe.

SilverHorse · Aug 3, 2005

I must have lucked out and bought the gentile kind as I've had no issues due to spraying it. This a part I've been meaning to replace. The problem is that once I've sprayed it, and it works, I forget about it!

four.six · Aug 3, 2005

as i promised.....

BigPonyMan said:
No biggie, just whenever you can is fine with me.

here are pics. there is 2 bolts. very simple operation. make sure u get the old gasket off.

forpit2000gt · Aug 3, 2005

four.six said:
here are pics. there is 2 bolts. very simple operation. make sure u get the old gasket off.

I believe he has a 2v.

BigPonyMan · Aug 4, 2005

Yea mine doesn't look like that unfortunately, but I found it and put the IAC on no problems so thanks anyway. Now about that little black thing that spins on the top of it, what does that do? I've turned it while the car is on and nothing happened at all.

AIC trouble

BigPonyMan

New Member

hotmustang331

Active Member

Buckman

New Member

hotmustang331

Active Member

BigPonyMan

New Member

mustang70

four.six

New Member

BigPonyMan

New Member

four.six

New Member

forpit2000gt

four.six

New Member

UhadMEatGT

New Member

Kilgore Trout

Fried or Broiled ?

SilverHorse

New Member

BigPonyMan

New Member

Jinx

I like cats, cats like me. Cats and I fully agree.

SilverHorse

New Member

four.six

New Member

Attachments

forpit2000gt

BigPonyMan

New Member

Similar threads

AIC trouble

New Member

Active Member

New Member

Active Member

New Member

New Member

New Member

New Member

New Member

New Member

Fried or Broiled ?

New Member

New Member

I like cats, cats like me. Cats and I fully agree.

New Member

New Member

Attachments

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency