• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Airbags?!

  • Thread starter Thread starter HazeDrake
  • Start date Start date Aug 14, 2006
H

HazeDrake

New Member
Aug 7, 2006
34
0
0
Aug 14, 2006
#1
  • Aug 14, 2006
  • #1
Hey, yea another post in the technical seciton by me... anyways, I've only had my car (95 stang) for about a week and a half, but it in a private sale cert and e-tested, went and got insurance got plates etc. Anyways, since owning I've been doin a few things to it, added deck, speakers, replaced some fuses, anyways, I noticed the jerk who owned th car used a peice of electrical tape to cover the airbag warning light. When the car is on, this light flashes and never goes away. Also, when I replaced the fuse I guess I also pushed another fuse back in cuz one was loose, and it must of been the fuse for the warning beep, cuz now my car beeps at my from the airbag fault as well as light up.

So, there is a newer engine in the car, im guessing maybe since the newer engine install the airbag sensors weren't installed properly? I might have to take this in to the shop, anyone know anythin?

Also, how did the guy get the car certified with the light on?
 
H

HazeDrake

New Member
Aug 7, 2006
34
0
0
Aug 14, 2006
#2
  • Aug 14, 2006
  • #2
or if anyone can tell me what fuse to pull to stop the annoying beeping, I'd appreciate it (dont have a manual)
 
M

MustangGT95

New Member
Jul 29, 2003
407
1
0
Aug 14, 2006
#3
  • Aug 14, 2006
  • #3
The beep started whenever I removed my airbag light. My airbags deployed. I stumbled across a new center piece on ebay that did away with the airbag and I got it.

I think I am going to try to find what beeps because it is real annoying. It stops after a few minutes but its annoying.

let me know if you figure anything out.
 
D

Danman765432

Member
Mar 3, 2006
471
0
16
Nutley, NJ
Aug 14, 2006
#4
  • Aug 14, 2006
  • #4
When i got in my accident i kind of hooked up my new airbag pretty ghetto. I got and escort airbag for the steering wheel, same exact as ours, then got the module from that car(modifided it to fit on our bracket)and also the sensors from that car and modified those to be bolted on the front of mine. I really dont know if the airbag works but everything hooked up right and it should. The light never even comes on.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 14, 2006
#5
  • Aug 14, 2006
  • #5
Just in case it helps narrow down the source of the issue - this article.

If you get the code, you can narrow down the issue.

I recall some guys on here disabling the system and it didn't sound too hard (for off road use, o' course ). Maybe a search will reveal some tips.

Good luck.
 
T

Trick Pony

New Member
Apr 3, 2006
9
0
0
Aug 15, 2006
#6
  • Aug 15, 2006
  • #6
The chime comes on to tell you that your airbag light is not working and your airbags are disabled. Pull the bulb, remove your center consoul by the shifter. The beaping is comming from the black box going beep beep beep. Un plug it, rub it on your johnson and throw it away. You will get no more chime, no more light, no more problem. You WILL NOT HAVE AIR BAGS THOUGH! I was happy to not have airbags so no biggie.
 

Therian

The Highlander
Founding Member
Apr 21, 2002
0
1
0
Waterloo, Ontario
Aug 15, 2006
#7
  • Aug 15, 2006
  • #7
to my knowledge, no one has successfully gotten rid of the beeping noise without disabling their air bags. The only way I know of to get rid of the noise, while keeping the airbags functional is to take it to the dealership.

the sound is annoying as hell...but I've lived with it for two years

just can't bring myself to take the car to the dealership just to get fisted
 
M

MustangGT95

New Member
Jul 29, 2003
407
1
0
Aug 15, 2006
#8
  • Aug 15, 2006
  • #8
I might try taking that stupid box out. My air bags don't work anyways...
 

94-302-vert

Active Member
Aug 16, 2004
1,947
2
36
NE CT
Aug 16, 2006
#9
  • Aug 16, 2006
  • #9
I know that the box will beep when you are trying to clear codes out of it too. Check the grey connector unser the glovebox to be sure the wires are still separate.
 
You must log in or register to reply here.

Similar threads

Alternator not charging
  • SchwarzStock
  • Jul 6, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
3
Views
251
1965 - 1973 Classic Mustangs -General/Talk- Oct 17, 2026
SchwarzStock
What's your tow rig?
  • LILCBRA
  • May 31, 2026
  • Other Auto Tech
Replies
9
Views
458
Other Auto Tech Oct 23, 2026
JH96GT
Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
578
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
F
Fox 1990 Mustang GT 5.0 A9L – Engine suddenly shuts off but immediately restarts when key turned
  • FishermansFriend
  • Aug 9, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
16
Views
656
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Aug 30, 2026
General karthief
A
Resolved 03 GT Parasitic Draw Fuse 26 (PCM)
  • Antrix
  • Mar 22, 2025
  • SN95 4.6L Mustang Tech
Replies
2
Views
854
SN95 4.6L Mustang Tech Mar 24, 2025
89ripper
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?