• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

All fairly stock motors, what does your Fox idle at?

  • Thread starter Thread starter 1987stangman
  • Start date Start date Aug 1, 2006

1987stangman

Member
Jul 12, 2006
684
24
19
Aug 1, 2006
#1
  • Aug 1, 2006
  • #1
A little while ago I posted a question about why I might be having problems with my 87' GT's surging idle after a new intake install and I was guided to the surging idle page which helped me out alot and helped me fix my problem. I ended up buying a new IAC which solved my problem. My car now idles about 800RPM or so and I was used to about 1k idle (acording to the stock tach anyways). I figured I would ask out and see what everyone else is at.

Thanks
 
R

Reed

New Member
Mar 31, 2005
78
0
0
BC, Canada
Aug 1, 2006
#2
  • Aug 1, 2006
  • #2
My car used to idle around 700-800 before I touched some things. Now it idles around 500-600 and is having some troubles which I will soon have to tackle. I'm not comfortable with it at 600 at all. 800 sounds about right.
 

stang8urimport

Autozone Junkie
Founding Member
Jun 21, 2002
1,499
12
59
Daytona Beach, FL
Aug 1, 2006
#3
  • Aug 1, 2006
  • #3
Stock idle is 650 RPMs. That's where mine idles.
 

s&k stangs

New Member
May 24, 2006
0
0
0
MOnroe, Nc
Aug 1, 2006
#4
  • Aug 1, 2006
  • #4
I had the ole surge problem too, had to clean the IAC, recal the TPS and adjust the stop screw on the TB. Was loping at around 550 now its at a smooooth 800. I think 800-900 is the norm from what I've seen around the forums for a stocker.
 

Vinnietbird

Member
Jun 2, 2005
584
3
19
Aug 1, 2006
#5
  • Aug 1, 2006
  • #5
Mine is about 800.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 1, 2006
#6
  • Aug 1, 2006
  • #6
Both at 650-700, depending upon electrical load.

Once guys start doing HCI's without a tune is where the higher idle can be needed.
 
M

madman59

New Member
Apr 11, 2006
4
0
0
Aug 1, 2006
#7
  • Aug 1, 2006
  • #7
800rpm for me, cold air intake is only mod.
 
1

1SLO306

My 97 GTP owns you ALL!
Mar 31, 2005
904
1
17
Muhlenberg, ky
Aug 1, 2006
#8
  • Aug 1, 2006
  • #8
mine around 700 when its together and running LMFAO
 

88_GT_5_oh

Sportin' a turbo 5.0 in Canadistan
Jul 4, 2004
1
0
1
WPG/MB/CA
Aug 2, 2006
#9
  • Aug 2, 2006
  • #9
wow i always wondered about this, with my turbo HCI car i have a hard time with anything under 950 and i have a PMS and a wideband
 

88 Fox GT

Active Member
Nov 18, 2002
1,674
0
36
Iowa
Aug 2, 2006
#10
  • Aug 2, 2006
  • #10
Mine idles around 800. Idles at about 650-700 with the A/C on.
 

1987stangman

Member
Jul 12, 2006
684
24
19
Aug 2, 2006
#11
  • Aug 2, 2006
  • #11
Well, I guess I'm good then! Thanks everyone.
 

Jaswir

Member
Mar 31, 2005
578
0
18
Orlando, FL
Aug 2, 2006
#12
  • Aug 2, 2006
  • #12
say right around 700rpms... you can play with it by the set screw under the throttle body if you need to adjust it some
 

ninety15.0

New Member
Mar 10, 2004
1,336
0
0
Aug 2, 2006
#13
  • Aug 2, 2006
  • #13
mine idles around 900...im sure i could adjust it down a bit but i dont mind 900 its real smooth.
 

Curse

Member
Apr 8, 2004
791
2
16
El Paso, TX
Aug 2, 2006
#14
  • Aug 2, 2006
  • #14
Mine idles at 700.
 

TrophyHead

15 Year Member
Mar 18, 2003
1,195
11
49
PA
Aug 2, 2006
#15
  • Aug 2, 2006
  • #15
ninety15.0 said:
mine idles around 900...im sure i could adjust it down a bit but i dont mind 900 its real smooth.
Click to expand...

Same here.
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Aug 2, 2006
#16
  • Aug 2, 2006
  • #16
750 is what I just got mine to idle at.
 

Foxfan88

My Grandpa has great wood.
Sep 13, 2004
2,487
4
0
Miami, Ok
Aug 2, 2006
#17
  • Aug 2, 2006
  • #17
old engine with stock cam would idle nicely at around 600-650. The new engine with the B-cam idles best at like 750 or so...
 
You must log in or register to reply here.

Similar threads

G
Idle surging after warm up
  • GALLY3309
  • Jun 10, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
1
Views
135
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 10, 2026
Noobz347
C
Engine Idle cuts out
  • claypoolxx
  • Mar 7, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
25
Views
792
Fox 5.0 Mustang Tech Jul 24, 2026
alutwon
J
High idle 2003 Mach 1
  • JohnnyUtah
  • Mar 29, 2026
  • SN95 4.6L Mustang Tech
Replies
3
Views
189
SN95 4.6L Mustang Tech Mar 31, 2026
JohnnyUtah
J
K
Procharger Stage 2 - 2013 Mustang GT Minor Hiccups
  • KHills5058
  • Oct 9, 2025
  • 2010 - 2014 Specific Tech
Replies
0
Views
154
2010 - 2014 Specific Tech Oct 9, 2025
KHills5058
K
K
2013 Mustang GT Procharger Stage 2 Kit Issues
  • KHills5058
  • Oct 9, 2025
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
3
Views
253
2005 - 2014 S-197 Mustang -General/Talk- Oct 10, 2025
KHills5058
K
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?