• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

alternator suggestions.. please help

  • Thread starter Thread starter coming4you
  • Start date Start date Jan 23, 2006
  • 1
  • 2
Next
1 of 2 Next Last
C

coming4you

New Member
Jun 17, 2005
32
0
0
Toms river NJ
Jan 23, 2006
#1
  • Jan 23, 2006
  • #1
I have an 88 coupe... with extensive amounts of work..
Im looking for a 140 amp alternator that doesnt use a 1 wire hook up and retains the factory harness.. or doesnt require much wiring at all.. and charges very well..


what are you guys using..
thanks in advance
 

pb_paulie_b

Founding Member
May 19, 2001
894
0
0
Chaptico, Maryland
Jan 23, 2006
#2
  • Jan 23, 2006
  • #2
Does it have to be 140 amps? 130 amp 3G conversions are pretty inexpensive.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jan 23, 2006
#3
  • Jan 23, 2006
  • #3
Here's websites with pictures of the 3G installation...

See http://www.geocities.com/smithmonte/Auto/3G_130A_Alternator_Upgrade.htm - all the tech data you could ever want to know
OR
http://www.mustangcentral.net/tech/alternator.html - excellent pictures of installation

Use these sites for information on the right way to do the wiring. Some people will tell you that you can skip the wiring upgrade, but it will catch up with you sooner or later. A fire in the wiring harness is ugly and expensive.

Under no circumstances connect the two 10 gauge black/white wires to the 3G alternator. If the fuse blows in the 4 gauge wire, the two 10 gauge wires will be overloaded to the point of catching fire and burning up the wiring harness.

The secondary power ground is between the back of the intake manifold and the driver's side firewall. It is often missing or loose. It supplies ground for the alternator, A/C compressor clutch and other electrical accessories such as the gauges. Any car that has a 3G alternator needs a 4 gauge ground wire running from the block to the chassis ground where the battery pigtail ground connects.

Electric fan = 3G alternator if you want long life & reliability from your car.
The electric fan saves some HP. The stock fan's parasitic drag runs from 7-12 HP depending on who you talk to. The electric fan uses about 1/2 HP of power from the electrical system.

Figure this:
Ignition system & computer = 12 amps
Fuel pump = 12 amps
Exterior lights = 15 amps
Fan (heater or A/C) = 15 amps (can run between 5-25 amps depending on setting)
Radio & instruments = 10 amps
Wipers = 10 amps

That's grand total of 74 amps from a 65 amp alternator. Talk about overdrawn at the bank!

See WWW.partsexpress.com for the fuse & fuse holder.
Fuse @ $3.90 each (need one) http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=071-952

Fuseholder @ $5.80 each (need one) http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=263-630

4 gauge black wire @ $1.25 a foot (use string to lay out routing & determine length) http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=100-196

4 gauge red wire @ $1.25 a foot (use string to lay out routing & determine length) http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=100-194

4 gauge ring crimp terminals (package of 5) $3.25. http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=095-584

Pre-fab 4 gauge cables with lugs already on the ends are available in most auto parts stores. Look for the starter switch to starter cables.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 23, 2006
#4
  • Jan 23, 2006
  • #4
coming4you said:
I have an 88 coupe... with extensive amounts of work..
Im looking for a 140 amp alternator that doesnt use a 1 wire hook up and retains the factory harness.. or doesnt require much wiring at all.. and charges very well..
Click to expand...
A tip from 04sleeper for a clean easy install is to use this harness (the top one).

Good luck.
 

04sleeper

Founding Member
Jun 22, 2002
2,674
14
89
Dallas, TX
Jan 23, 2006
#5
  • Jan 23, 2006
  • #5
HISSIN50 said:
A tip from 04sleeper for a clean easy install is to use this harness (the top one).

Good luck.
Click to expand...
Ahhh, yes. That works very well.
 
R

rustang87

New Member
Apr 1, 2005
70
0
0
Sac
Jan 24, 2006
#6
  • Jan 24, 2006
  • #6
I need to get started on this project as well. If i buy that 3G harness, all I need are... Right?
7-10 FT 4G Wire
Ring Crimp terminals
Fuse/Fuse Holder
Junk Yard 3G?
I have a Mark VIII fan, thats next... 130 AMP good enough and Start up and Idle?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 24, 2006
#7
  • Jan 24, 2006
  • #7
rustang87 said:
I need to get started on this project as well. If i buy that 3G harness, all I need are... Right?
7-10 FT 4G Wire
Ring Crimp terminals
Fuse/Fuse Holder
Junk Yard 3G?
I have a Mark VIII fan, thats next... 130 AMP good enough and Start up and Idle?
Click to expand...
I would order some proper sized heat shrink if you dont have any that large (I didnt).

Otherwise, you might need a few ancillary items like a nut/bolt or a means to tap a boss, and little stuff like that.

The mark VIII has some decent draw - a true 3G should work easy if you use a variable controller. I will note that if buying a 3G, I might get a slightly higher output unit (I went with a 160) - that will help with the fan too.

Good luck.
 
S

snoboardcore

New Member
Mar 30, 2005
276
0
0
New Hampshire
Jan 24, 2006
#8
  • Jan 24, 2006
  • #8
i would also like to know about the 3g alternator upgrade and what is needed
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 24, 2006
#9
  • Jan 24, 2006
  • #9
snoboardcore said:
i would also like to know about the 3g alternator upgrade and what is needed
Click to expand...
I am not sure if you saw the links provided in Jrichker's post - those will give you a good idea of what is needed/involved.

Good luck.
 
R

rustang87

New Member
Apr 1, 2005
70
0
0
Sac
Jan 24, 2006
#10
  • Jan 24, 2006
  • #10
The local mustang junkyard has a 95 3g alt. $25, how much did you pay for yours?
I just ordered the 3g harness,
Where is that ground from the intake to the firewall, or what does it look like? Is it insulated or that flat bare metal wire?
Should I get a 150, 175, or 200 fuse? I will be using 4G all around.
 

glowstang93

20+ Year Stangneter
Feb 9, 2003
853
8
39
Illinois
Jan 24, 2006
#11
  • Jan 24, 2006
  • #11
That is my question too. I have a 95 amp 3g with 10 gauge wire going from the alternator to the solonoid on fender. I have never had any trouble with it in 3.5 yrs, but I want to go ahead and increase that wire to 4 gauge and put in a fuse. What size fuse should I use with the 4 gauge wire and 95 amp alternator?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jan 24, 2006
#12
  • Jan 24, 2006
  • #12
glowstang93 said:
That is my question too. I have a 95 amp 3g with 10 gauge wire going from the alternator to the solonoid on fender. I have never had any trouble with it in 3.5 yrs, but I want to go ahead and increase that wire to 4 gauge and put in a fuse. What size fuse should I use with the 4 gauge wire and 95 amp alternator?
Click to expand...
I dont pretend to have 1/100th of Jrichker-like electrical knowledge but I fuse for the weakest link. I would use a fuse rated for 10 AWG over that length (for now). Once the alternator is the weak link, I would probably use a 100 amp fuse.

FWIW, I use a 150 amp fuse for the 160 amp alt. I do recommend buying an extra fuse and putting it in your glove box - just in case something ever happens (a connections comes loose and shorts to ground, etc).

For Rustang, I would use a 125 or 150 amp fuse (for a 130 amp alt)

Good luck.
 

04sleeper

Founding Member
Jun 22, 2002
2,674
14
89
Dallas, TX
Jan 24, 2006
#13
  • Jan 24, 2006
  • #13
rustang87 said:
Where is that ground from the intake to the firewall, or what does it look like? Is it insulated or that flat bare metal wire?
Click to expand...
It is the flat bare metal wire, but is uaually bolts to the back of the head, not the intake.
 

Mr_Q

Founding Member
Nov 5, 2002
721
8
48
Burbank, CA
Jan 24, 2006
#14
  • Jan 24, 2006
  • #14
There aren't any. The only option, if you want to retain the factory harness and mounting is, to use a the 95amp upgrade they make from paperformance.

But considering it's not much of an improvement over stock it's not really worth it.

So.....you should go with the 120 or 130amp. But it WILL require a new power lead, grinding of the bracket, at the least. Ideally you should replace the other wires too.

Although with my 130amp, I have been running just a new power main only with success.
 
T

TheUser

Active Member
Jul 25, 2003
1,859
1
36
Springfield, MO
Jan 24, 2006
#15
  • Jan 24, 2006
  • #15
for the power and ground wires, you could take some measurements and go to your local auto parts store and check out the starter wires. They vary in length and have both ends as ring terminals. That's what I did for my block to fenderwell ground. You could easily do it for your alternator power wire too. I wrapped the extra length around my front sway bar (I'm pretty sure that's what it is) for my 4ga alt power wire and used a 140amp circuit breaker w/ my 140 amp Powermaster alt; no fuses for me - all I gotta do is flip the breaker switch and go I don't think the circuit breaker was very high either - maybe $20 if I remember right - I can check later if desired.
 

timewarped1972

Member
Jun 17, 2004
642
0
16
mesa, az
Jan 24, 2006
#16
  • Jan 24, 2006
  • #16
i'm still waiting for a 3g alt sticky here in tech
 
C

criticman

Member
Sep 7, 2003
723
1
16
Rome, GA
Mar 7, 2006
#17
  • Mar 7, 2006
  • #17
Bringing this one back up to get some clarification.

I have done all of the searches, read all of the threads, and read everyone's links (especially jrichker).

I have decided on a 130 amp 3G alt.

My understanding is that the wiring explained by the links jrichker posted is simple - but to save time (been way too busy and I need as much time as I can do install the alt, supercharger & all of the supporting items), I can just buy the wire upgrade from PA-Performance http://www.pa-performance.com/display.asp?sku=65, correct? That would be the only wiring change necessary?

To save on money, I could do a reman. unit from Autozone, etc...lifetime warranty, but I have heard people have to use those warranties a lot.
So further pricing research shows that buying one of these reman. units would be just as expensive, so screw that.

To just do it right, I could do the PA-Performance 130 amp 3G to start. If I go this route, who has the best deal on them? I have already spent tons for my upcoming supercharger install, so anything I can save on this alt. upgrade will be great.

Thanks.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Mar 7, 2006
#18
  • Mar 7, 2006
  • #18
I have a reman from Advance Discount Auto Parts and haven't had any problems. The trouble with PA Performance alternators is that if it does go bad, you have 2-3 day wait to get the replacement unit. With mine, worst case wait is 4 business hours or less if I am willing to do some local driving to pick one up from another Advance Discount Auto Parts store.
 
C

criticman

Member
Sep 7, 2003
723
1
16
Rome, GA
Mar 7, 2006
#19
  • Mar 7, 2006
  • #19
Alright. What about the wiring question? The PA-Performance wiring upgrade is the same as what your link writeups would produce, just a lot less effort/time on my part, correct?
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Mar 7, 2006
#20
  • Mar 7, 2006
  • #20
criticman said:
Alright. What about the wiring question? The PA-Performance wiring upgrade is the same as what your link writeups would produce, just a lot less effort/time on my part, correct?
Click to expand...
The main wire & fuse takes the same amount of installation time for either a 3G or a PA Performance alternator.

For a 3G only install, it takes 15 minutes max, to strip one white wire, solder another piece on, heat shrink that and crimp a female fast on tab connector. It's that simple. When I got done, all the stock wiring was still in place, still had all the factory connectors on it. In an emergency, if a 3G was not available, I could go back to using the original 2G without changing anything.
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

A
Resolved Electrical Help Please
  • Alabama
  • Jan 22, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
378
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 22, 2026
AeroCoupe
F
Electrical From scratch: alternator wiring
  • fox racer v2
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
0
Views
690
Fox 5.0 Mustang Tech Jun 23, 2025
fox racer v2
F
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
491
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
S
Preparation for Holley Terminator X install – Foxbody 306 (electrical fan, alternator, MSD Ignition, etc)
  • So_Flo
  • Mar 1, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
3K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 4, 2026
General karthief
Electrical Innovate PSB-1 is DOA? Am I an idiot? All plausable. Please Help
  • Dontknowchit
  • Apr 26, 2025
  • Fox 5.0 Mustang Tech
Replies
1
Views
687
Fox 5.0 Mustang Tech Apr 26, 2025
Dontknowchit
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?