ANOTHER Stupid Paint Question...

65stanger

big blue fuzzy closet monster

Founding Member

Oct 25, 2001

3,885

1

58

In the Deepest, Darkest, corner of THE CLOSET, whe

Oct 21, 2006

#1

• Oct 21, 2006

• #1

Now that my engine is all nice and clean and freshly painted, the question arises.....what to do about my transmission.......???

In either case I have to clean/degrease the outer casing....question is, once this has been done, do I continue on and "polish" the casing and clear coat, or do I prep and paint it to match the engine..???

 

Attachments

• trans.webp

  50.9 KB · Views: 178

B

bnickel

Founding Member

Aug 21, 2002

5,640

3

77

lubbock, texas

Oct 21, 2006

#2

• Oct 21, 2006

• #2

i painted mine black and clear coated it last time. before that i used aluminum paint, like aluma blast but didn't clear it so it didn't take long for it to look like crap.

 

krash kendall

Active Member

Nov 19, 2004

1,258

0

36

Aldergrove, B.C. Canada

Oct 21, 2006

#3

• Oct 21, 2006

• #3

Paint it. Any shine you manage to coax out of that will be gone in no time. Besides, who's going to see it? It's not you have a glass-bottom-car! Get a chrome tranny pan if you want to add some wow factor. Last time bought a chrome one to replace a dinged up chevy pan, it was about a third the price of an OEM one.

 

enferno

Member

Jun 20, 2006

418

2

16

Oct 21, 2006

#4

• Oct 21, 2006

• #4

at work i've done it a few different ways.


paint the bell housing black (or w/e the engine block color was) then paint the rest of the tranny silver/cast.


or paint the whole thing silver. that's what i did.

i had a can or two left over from doing the intake/headers on my engine, so i just degreased it and painted it with that.


make sure you use high temp paint though, as exhaust commonly passes pretty close to the tranny/bell housing

i can put up pics if you want

 

65stanger

big blue fuzzy closet monster

Founding Member

Oct 25, 2001

3,885

1

58

In the Deepest, Darkest, corner of THE CLOSET, whe

Oct 22, 2006

#5

• Oct 22, 2006

• #5

If I do paint it, it will be the same color as the engine as I still have half a can of the engine (hi-temp) paint left over...............

The plan being, once the engine is complete, take it off of the stand and put it back on the dolly, then put the tranny on the stand to work on it there!