Any dune riders in here?

5.0fox · Apr 8, 2007

Who here rides the oregon or washington dunes? What do you ride? If theres enough people would you be interested in a stangnet dune trip?

I ride a z400/470 with a hotrods 5mill stroker crank and a 12-1 cp piston, yoshi cams and rs3 exhaust, kibblewhite valves, advantage cycle porting, 39mm fcr, and all the little odds and ends. Hoping for 50+ hp on pump gas! Check out the buildup here http://www.z400central.com/invision/index.php?showtopic=69334

Lets see what you got post some pics if you got um! Hopefully enough people will be interested in a get together.

Mustang78 · Apr 8, 2007

i usually ride winchester bay, sand lake, florence, and the other oregon dunes i cant think of.. we have a place by moses lake so i'll be there sometime within the next few months..i dont really ride much anymore, but i have an 87 banshee with some aluminum parts, 2:1 35mm carb, T5 pipes, etc...

~Mark~

Juiced87Notch · Apr 8, 2007

I've got an 06 Yfz 450 with all the bolt on's, no motor work yet, it should be around 45-50hp from others I've seen dyno'd I usually ride at sandlake for day trips and plan week or weekend trips to winchester bay, I want to get down to coos bay and ride all 3 of the areas there eventually, I'd be down for a stangnet trip, just give me a few months notice for a weekend trip so I can get it off, day trips I can usually go every sunday

saleenster · Apr 8, 2007

Juiced87Notch said:
I've got an 06 Yfz 450 with all the bolt on's, no motor work yet, it should be around 45-50hp from others I've seen dyno'd I usually ride at sandlake for day trips and plan week or weekend trips to winchester bay, I want to get down to coos bay and ride all 3 of the areas there eventually, I'd be down for a stangnet trip, just give me a few months notice for a weekend trip so I can get it off, day trips I can usually go every sunday

See sig. I ride as much as possible. This year will be 3 trips a month. Mostly Florence or Windy Bay

LordMustangGT · Apr 8, 2007

I got a black 05 TRX 450R, Stage 2 intake, and just pulled out the stock spark arrester. Might have 20 hrs on it in two years. I just need someone to haul it for me. I got no problem sliting gas. Oregen dunes are hevean!!!

almostblown · Apr 8, 2007

04 MX YFZ. WR crank, Wicked/CP 13.5:1 piston, full Sparks exhaust, FCI intake. My carb will be shipped out tomorrow to get bored to a 42mm.

Ive got some new stuff coming in for it tomorrow, I'll post pictures then.

Juiced87Notch · Apr 8, 2007

almostblown said:
04 MX YFZ. WR crank, Wicked/CP 13.5:1 piston, full Sparks exhaust, FCI intake. My carb will be shipped out tomorrow to get bored to a 42mm.

Ive got some new stuff coming in for it tomorrow, I'll post pictures then.

I still cant get mine to run right its running to rich now, blowin flames out the back on acceleration lol I dunno wtf is wrong with it

281pony · Apr 8, 2007

too bad, just sold my raptor. otherwise id be down for a ride..

almostblown · Apr 8, 2007

I still cant get mine to run right its running to rich now, blowin flames out the back on acceleration lol I dunno wtf is wrong with it

Thats weird. Ive got a ton of main jets here and a couple pilots, we can try a bunch of stuff once the weather gets nice if you want. How many turns out on the fuel screw are you?

almostblown · Apr 9, 2007

Thats weird. Ive got a ton of main jets here and a couple pilots, we can try a bunch of stuff once the weather gets nice if you want. How many turns out on the fuel screw are you?

EDIT* I didnt realize you are in Gresham. You should just bring it to Action Motorsports in Fairview and have them jet it with original Keihin jets, aftermarket jets dont usually correspond very well with the Keihins.

Juiced87Notch · Apr 9, 2007

almostblown said:
Thats weird. Ive got a ton of main jets here and a couple pilots, we can try a bunch of stuff once the weather gets nice if you want. How many turns out on the fuel screw are you?

EDIT* I didnt realize you are in Gresham. You should just bring it to Action Motorsports in Fairview and have them jet it with original Keihin jets, aftermarket jets dont usually correspond very well with the Keihins.

I have both the gtyr (yamaha) and a jd jet kit, and its doing it no matter wich jets I use... I played around with the fuel screw a bit and its doing it even when its screwed all the way in. I have a 45 pilot and a 168 main in right now, It's bogging really bad... like if its idling and I give anything more than gradual throttle it'll bog and start to backfire up through the carb, it started bogging when I changed the spark plug so i dunno wtf is wrong with it. Action originally jetted it, but they left the stock pilot jet in, put the adjustable needle, and put a 165 main in it wich is what the instructions says to do to jet for removing the airbox lid... I was like wtf?!?!

Juiced87Notch · Apr 9, 2007

Juiced87Notch said:
I have both the gtyr (yamaha) and a jd jet kit, and its doing it no matter wich jets I use... I played around with the fuel screw a bit and its doing it even when its screwed all the way in. I have a 45 pilot and a 168 main in right now, It's bogging really bad... like if its idling and I give anything more than gradual throttle it'll bog and start to backfire up through the carb, it started bogging when I changed the spark plug so i dunno wtf is wrong with it. Action originally jetted it, but they left the stock pilot jet in, put the adjustable needle, and put a 165 main in it wich is what the instructions says to do to jet for removing the airbox lid... I was like wtf?!?!

I'm allmost wondering if I've got sand in something, clogging it up

almostblown · Apr 9, 2007

Which plug did you put in it? Gapped properly?

Juiced87Notch · Apr 9, 2007

almostblown said:
Which plug did you put in it? Gapped properly?

yea the gap was correct, I dont remember what it was gapped at though, it was an ngk, same thing that was in it from the factory, part number matched up and whatnot. what is the correct gap? I may as well check it again just to make sure.

LordMustangGT · Apr 9, 2007

I can't think of anything either. Take some brake cleaner and clean it up nice! Get that little tub that comes with the can and put it in every little hole and blow it threw. I jeted mine and it worked perfect. realy gave it some more power. I want to go to the sand again.

almostblown · Apr 9, 2007

Gap is supposed to be .028-.031.

Shoot me a PM with an email or AIM handle and I can send you the '04 service manual.

LordMustangGT · Apr 9, 2007

just FMI How big a shot can you run on a bike, 15, 20, 100.... lol anyone know. I'm thinking of doing it.

almostblown · Apr 9, 2007

On YFZCentral.com and yfztech.com there will be some nitrous info.

5.0fox · Apr 11, 2007

oh no matt havent you learned with the nitrous yet! lol j/k You can usually get away with about a 20 horse hit with the stock carb if you have it set up right. Most atv nitrous kits plumb a line to the float bowl and pressurize it when you spray so that it forces more fuel through the jets and makes it work like a wet kit.

saleenster · Apr 11, 2007

5.0fox said:
oh no matt havent you learned with the nitrous yet! lol j/k You can usually get away with about a 20 horse hit with the stock carb if you have it set up right. Most atv nitrous kits plumb a line to the float bowl and pressurize it when you spray so that it forces more fuel through the jets and makes it work like a wet kit.

I got my kit here.

http://www.boondockers.com/site.htm?/main.html

Note, I took my R out a couple wkends ago and broke the front side of 4th gear in my tranny on my 1st day of riding. Not sure I am going to be using it much longer. A ton more money to get the trike to handle it

Any dune riders in here?

5.0fox

Member

Mustang78

New Member

Juiced87Notch

Member

saleenster

LordMustangGT

Member

almostblown

New Member

Juiced87Notch

Member

281pony

Active Member

almostblown

New Member

almostblown

New Member

Juiced87Notch

Member

Juiced87Notch

Member

almostblown

New Member

Juiced87Notch

Member

LordMustangGT

Member

almostblown

New Member

LordMustangGT

Member

almostblown

New Member

5.0fox

Member

saleenster

Any dune riders in here?

Member

New Member

Member

Member

New Member

Member

Active Member

New Member

New Member

Member

Member

New Member

Member

Member

New Member

Member

New Member

Member

Privacy & Transparency

Privacy & Transparency