Anybody running an AOD with 4.10s and a blower?? I gotta few ?s

[Kdubslugga]

Well i just picked up a Powerdyne unit for my 88 GT. I wont be installing probably until next summer, because i need a mass air conversion. Anyways, as of right now with my mods im trapping 100.47 at about 5500-5600 rpm through the traps. This winter im adding a 3000 Stall, Transgo and a Roller rockers. Im wondering what RPM i will go through the traps with a Blower at about 6psi? So who has 4.10s and supercharger??

 

[rsw007]

you will probably have to step back to 3.73's or do like me and step up to the 28" dr's. i stepped up because of the 90 shot of gas, no times yet though.

 

[nosmatt]

well, none of those mods are going to give you any mph......... if it is a non lockup converter, i would say 300-400 rpm over where you are at now, if it's lockup, your rockers might give you half a mph, at best......so you should be fine.

 

[Kdubslugga]

Ok cool, so if i hit the rev limiter a 28 inch tall tire should correct that?? Im concerned only with hitting the limiter when i add the blower!!

 

[hllon4whls]

Well i just picked up a Powerdyne unit for my 88 GT. I wont be installing probably until next summer, because i need a mass air conversion. Anyways, as of right now with my mods im trapping 100.47 at about 5500-5600 rpm through the traps. This winter im adding a 3000 Stall, Transgo and a Roller rockers. Im wondering what RPM i will go through the traps with a Blower at about 6psi? So who has 4.10s and supercharger??

That all depends on how much the blower increases the trap speed.

 

[nosmatt]

oooooooooooh, ok........ i misunderstood, thought your traps listed were with the blower....... you could be in trouble. 28"'s will help.......but they are not a cure all.