• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Anyone here go from 3.73 to 4.10?

  • Thread starter Thread starter Mean88
  • Start date Start date Dec 26, 2003
M

Mean88

Founding Member
May 13, 2002
656
0
16
Dec 26, 2003
#1
  • Dec 26, 2003
  • #1
I plan on swapping from 3.73 to 4.10 this winter. I was curious as to wether or not there was much of a difference. Many say that 4.10 are overkill for a daily driver, I guess I would just like some opinions.
Ted
 
N

needforspeed440

New Member
Dec 5, 2003
49
0
0
Dec 26, 2003
#2
  • Dec 26, 2003
  • #2
i have 4.10s with a spool on mine. I drive it daily, but i only live a couple miles from work. I think they really give you that extra edge off the line for sure. I wouldn;t recommend much interstate driving or top end racin much over a 100. Gas sucks on teh interstate, but not to bad city driving as long as you take it easy. HAVE FUN!
 

ONEBADPNY

New Member
Nov 10, 2002
195
0
0
FREMONT, NEBRASKA
Dec 26, 2003
#3
  • Dec 26, 2003
  • #3
i did the swap and i'm never looking back. at the track the rpms stay up in the power band soooooooo much better. there is not that much difference in town or highway. i never drive mine on interstate though. i notice the rpms about 200 more is all. at 70 i am at 2400rpms..
 

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Dec 26, 2003
#4
  • Dec 26, 2003
  • #4
Mean88 said:
I plan on swapping from 3.73 to 4.10 this winter. I was curious as to wether or not there was much of a difference. Many say that 4.10 are overkill for a daily driver, I guess I would just like some opinions.
Ted
Click to expand...
I just got 3.73's on Tues.I wouldnt go 4.10's because I do ALOT of highway driving.But to be honest,3.90's are crossing my mind!!
 

cleanLX

Founding Member
Jan 17, 2001
976
537
144
Dec 26, 2003
#5
  • Dec 26, 2003
  • #5
I went from 3.73's to 4.10's on my stocker. Made absolutly no other changes at that time.
Car went from mid-high 1.7 60's to low 1.7 60's and gained 1.5mph in the 1/8. It was the difference from running 13.teens to cracking into the 12's.

There is a difference in fuel mileage, not sure what it is, I've not checked, but it sure blew my fuel strategy the first couple trips to the track... had to buy gas once there to get the tank back up to 1/3 full.

With 245/50-16's out back, 50mph is 1800rpm, 70mph is darn handy to 2600rpm, 80mph is 2900rpm.

The car is my daily driver, but it's all city.
4.10's are not bad on the highway, but the 3.73's were definatly nicer for long trips.

Hope that helps.
 

fordman54935

Member
Jan 10, 2003
301
0
16
Wisconsin
Dec 26, 2003
#6
  • Dec 26, 2003
  • #6
ONEBADPNY said:
i did the swap and i'm never looking back. at the track the rpms stay up in the power band soooooooo much better. there is not that much difference in town or highway. i never drive mine on interstate though. i notice the rpms about 200 more is all. at 70 i am at 2400rpms..
Click to expand...


Same here. My car had 4:10's installed when i bought it. Actually the first time I test drove my car before I bought it I was amazed that the RPM's stayed at about 2300-2400 on the interstate. Heck, thats better than my 93 4-cyl with the 3.73's (automatic). And I absolutely love the way the car pulls when running through the gears. My only complaint is 1st gear is pretty short and traction is a problem (I cant really complain about that though-its a street car ) Also, I took my car on a longer trip last spring (a few hundred miles) and my mileage wasn't bad at all, probably around 18-19 mpg. I say go for them I know i'd never change them, unless the car became a daily driver (i commute 45 minutes each way to work). Hope this helps your decision!
 
M

Mean88

Founding Member
May 13, 2002
656
0
16
Dec 26, 2003
#7
  • Dec 26, 2003
  • #7
Keeping my car in its powerband is what i am looking for. I have a fully built 306, and it has alot more power near the top. Do the gears vibrate at all, or more compared to 3.73?
Hey ford man, where in wisconsin are ya?

Ted
 
M

Mean88

Founding Member
May 13, 2002
656
0
16
Dec 26, 2003
#8
  • Dec 26, 2003
  • #8
Another thing, I was putting down low thirteens, at 105. I was hoping that 4.10 gears would aid in me breaking 12s.
Ted
 
9

91lxntch

Member
Sep 27, 2003
247
0
16
altoona,p.a
Dec 26, 2003
#9
  • Dec 26, 2003
  • #9
also keep in mind that with 4.10's you may run out of gear if you ever do some more mods to the car in question....
 

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Dec 26, 2003
#10
  • Dec 26, 2003
  • #10
ONEBADPNY said:
i did the swap and i'm never looking back. at the track the rpms stay up in the power band soooooooo much better. there is not that much difference in town or highway. i never drive mine on interstate though. i notice the rpms about 200 more is all. at 70 i am at 2400rpms..
Click to expand...
DUDE,are you serious???????????2400 at 70?--------4.10's???????
 

willys1

Active Member
Dec 2, 2003
1,004
1
36
New Jersey
Dec 26, 2003
#11
  • Dec 26, 2003
  • #11
cleanLX said:
I went from 3.73's to 4.10's on my stocker. Made absolutly no other changes at that time.
Car went from mid-high 1.7 60's to low 1.7 60's and gained 1.5mph in the 1/8. It was the difference from running 13.teens to cracking into the 12's.

There is a difference in fuel mileage, not sure what it is, I've not checked, but it sure blew my fuel strategy the first couple trips to the track... had to buy gas once there to get the tank back up to 1/3 full.

With 245/50-16's out back, 50mph is 1800rpm, 70mph is darn handy to 2600rpm, 80mph is 2900rpm.

The car is my daily driver, but it's all city.
4.10's are not bad on the highway, but the 3.73's were definatly nicer for long trips.

Hope that helps.
Click to expand...
Well , Im sure you guys heard this a thousand times,but,I think I should have gone a little more in gears!!__________DAMN!!!!!!!!!!!
 
You must log in or register to reply here.

Similar threads

L
New here from Maine
  • lobster
  • Mar 2, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
19
Views
561
1965 - 1973 Classic Mustangs -General/Talk- Mar 5, 2026
lobster
L
Engine Contour fan CFM
  • Mustang5L5
  • Apr 6, 2026
  • Fox 5.0 Mustang Tech
Replies
13
Views
423
Fox 5.0 Mustang Tech May 22, 2026
qikgts
S
Hi. I'm new. 98 Cobra Bent Axle.
  • sbk93036
  • Mar 28, 2026
  • The Welcome Wagon
Replies
1
Views
85
The Welcome Wagon Mar 28, 2026
AeroCoupe
6
2010 V6 Sees differently than GT?
  • 6t9Mach1
  • Mar 31, 2026
  • 2010 - 2014 Specific Tech
Replies
2
Views
181
2010 - 2014 Specific Tech Apr 1, 2026
6t9Mach1
6
J
98 mustang gt carbon fiber
  • jay99914
  • Nov 14, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
130
1996 - 2004 SN95 Mustang -General/Talk- Nov 14, 2025
jay99914
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?