• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

AOD Tranny Service?

  • Thread starter Thread starter 85GTKid
  • Start date Start date Jul 31, 2004

85GTKid

Founding Member
Jun 6, 2001
511
0
16
Oregon
Jul 31, 2004
#1
  • Jul 31, 2004
  • #1
I need my car to last me a few more years before i graduate college and get a good job. So i was thinking i should put some money into it to make sure things will stay in working order. The tranny has never been touched in my ownership of 3 years and prolly many before that by the other owner. Whats included...filter and fluid change? what might a place charge? Thanks.
 
B

battyice

New Member
Mar 7, 2004
153
0
0
West Chazy, NY
Jul 31, 2004
#2
  • Jul 31, 2004
  • #2
I'm not sure what most garages charge to do a tranny fluid/filter change. It is fairly straightforward, you drop the transmission pan and spill ATF everywhere in the process...than replace the filter, reinstall the pan with the new gasket and refill the tranny. As I mentioned, the job can be quite messy if you don't have a large drain pan. I am a big fan of installing a drain plug whenever I service an "untouched" transmission on one of my cars. The reason for this is that you will probably be doing it again shortly after the first time. That new fluid will likely disolve a lot of varnish/deposits in your transmission and start to plug the filter. You'll notice the fluid darken in color and transmission responsiveness to decrease.

Post back with anymore questions, good luck.
 
1

1hot5.0

Founding Member
Sep 6, 2002
1,615
0
0
Surprise, Arizona
Jul 31, 2004
#3
  • Jul 31, 2004
  • #3
A shop would probably charge you around $60 + or - some to do the job. They will drop the pan, change the filter, put a new gasket on, and refill the transmission.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
33
129
Jul 31, 2004
#4
  • Jul 31, 2004
  • #4
as Batty said, you wont get a lot of the fluid out (though i bet you could get close if you undid a cooler line and added as it comes out). does the convertor have a drain plug?

Batty, im curious on your thoughts - i agree that the new fluid and its detergents, etc will losen up more crud. why not drop the pan again, in case the new crud gets into the filter? (im not being a jerk- just curious, as i dont have a slushbox, but family's cars all are).
 

ponyboy19

Founding Member
May 24, 2000
1,640
0
36
Jul 31, 2004
#5
  • Jul 31, 2004
  • #5
How many miles do you have on it.. If you have a ton of miles and the fluid has never been changed then i may leave it alone for fears of it slipping when you install the new fluid. If you choose to change the fluid yourself then after you do as mentioned above with the pan, take the converter dust cover off and rotate the engine until the converter drain plug is in reach.. Pull the plug and drain the converter as well. Personally when it comes to auto's fluid, I take it to a shop that has a machine that hooks into your tranny lines.. Start the car and the old pumps out and the new pumps in.. that way you know you are getting it all changed.. The place i use will install a tranny filter and gasket for free if I bring it to them and have them do a fluid change.
 
J

Js5ohLX

Member
Apr 5, 2004
287
0
16
Ohio
Jul 31, 2004
#6
  • Jul 31, 2004
  • #6
I agree with ponyboy19, get it flushed if it's been serviced before. Is your fluid burnt? If it is, DON'T touch it, if you do, get ready for a rebuild.
 

85GTKid

Founding Member
Jun 6, 2001
511
0
16
Oregon
Jul 31, 2004
#7
  • Jul 31, 2004
  • #7
car has 179,000 but the previous owner told me they blew it like maybe 7 years ago and had it rebuilt so who knows whats true but it shifts great so i belive them.
 
D

davs5.0

Founding Member
Jul 10, 2002
921
0
0
windsor,ontario,canada
Jul 31, 2004
#8
  • Jul 31, 2004
  • #8
and add a tranny cooler. Keeps these things from heating up and burning the fluid. Pretty cheap insurance. The drain plug is a huge benefit when you do it later on. Well worth the $10 or less it should cost to get one installed.
 
B

battyice

New Member
Mar 7, 2004
153
0
0
West Chazy, NY
Jul 31, 2004
#9
  • Jul 31, 2004
  • #9
HISSIN50 said:
as Batty said, you wont get a lot of the fluid out (though i bet you could get close if you undid a cooler line and added as it comes out). does the convertor have a drain plug?

Batty, im curious on your thoughts - i agree that the new fluid and its detergents, etc will losen up more crud. why not drop the pan again, in case the new crud gets into the filter? (im not being a jerk- just curious, as i dont have a slushbox, but family's cars all are).
Click to expand...

You're 100% right, you should drop the pan and change the filter. The drain plug is simply to aid in removing the pan: you can drain the fluid easily and don't make a huge mess in the driveway. In 2000 I bought a 1988 Grand Marquis with 100k that had the OEM fluid in it. I had to change the fluid and filter three times within a month before the fluid kept a good color and the transmission shifted correctly. Its been 4 years and now it needs to be done again...
 

shttygtstang

New Member
Jun 2, 2004
978
0
0
Jul 31, 2004
#10
  • Jul 31, 2004
  • #10
heres what ya do pull down a dark street find a nice dark sturdy sewer and dump it change your filter add the fluid then be gone do this for thre nights in a row remember too wear joging suit and your running sneakers for insurance

jk
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
33
129
Jul 31, 2004
#11
  • Jul 31, 2004
  • #11
battyice said:
You're 100% right, you should drop the pan and change the filter. The drain plug is simply to aid in removing the pan: you can drain the fluid easily and don't make a huge mess in the driveway. In 2000 I bought a 1988 Grand Marquis with 100k that had the OEM fluid in it. I had to change the fluid and filter three times within a month before the fluid kept a good color and the transmission shifted correctly. Its been 4 years and now it needs to be done again...
Click to expand...
oh right on. i gotcha!
i totally did not think of it as simply easing the fluid removal (i thought you meant that you would just use the new plug to drain fluid and leave the filter in there. my bad).

great idea. ill have to do that on some of the cars. the one that kills me is my sis's 95 probe - there is just a drain plug (no filter). gimme a break.

thanks again for setting me straight.
 

85GTKid

Founding Member
Jun 6, 2001
511
0
16
Oregon
Aug 1, 2004
#12
  • Aug 1, 2004
  • #12
So if i change the fluid i will have to change it a few times? Well i am not going to pay for that to be done a few times and dont have the time to do it myself. So one service wouldnt be sufficient? Better off just leaving the old fluid in?
 

ponyboy19

Founding Member
May 24, 2000
1,640
0
36
Aug 1, 2004
#13
  • Aug 1, 2004
  • #13
85GTKid said:
So if i change the fluid i will have to change it a few times? Well i am not going to pay for that to be done a few times and dont have the time to do it myself. So one service wouldnt be sufficient? Better off just leaving the old fluid in?
Click to expand...


If your set on getting it changed then NO, you don't have to pay to get it changed three times. If you do then I personally wouldn't be changing it regardless. IMO most of the reasons that is turns dirty quickly is because people don't get it all drained out of the lines and converter so it mixes in and discolors the new fluid. Just take it to a shop that has the machine I talked about and have them do a filter and pan gasket too.. they may tell you that you don't need it but insist that you want them to change the filter. the machine will get all the old out and refill it with new and as long as you don't experience any slippage you will be better off.. The machine actually flushes the tranny, lines, cooler, and converter. if it starts to slip. then I guess you should have left it alone. A good shop will look at the fluid, if they are amazed at how bad it looks they will often send you away and refuse the job for fears of it slipping. Atleast that is what my local shop told me. IMO as long as there is no slipping issues, new fluid that is not broken down by usage and heat will be better,
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
33
129
Aug 1, 2004
#14
  • Aug 1, 2004
  • #14
PB, perhaps you can shed some light: in reading about autos, it seems that some people (who've neglected trans services) have had problems with the full flushing service. they get probs with slipping, etc. a couple of old slushbox mechanics said they dont recommend the full flush (fluid exchange with the expensive machine - i cant think of the correct name for it), if the fluid looks burned or it has not had regular service.

i think it was something about the new fluid (detergents and viscosity) causing issues, as well as sludge that had been stuck to the convertor coming loose and jambing stuff up.

i thought you might know more about this stuff (and whether it is myth) - ive considered the exchange for a couple of family car's, but did not due to hearing this (the trannies have had average service intervals, etc). we dont need to open a can of worms, if that is what it is.

thoughts?
 
You must log in or register to reply here.

Similar threads

Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
335
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
Bought a 2001 GT from My Son
  • Hawkester
  • Oct 17, 2025
  • The Welcome Wagon
Replies
1
Views
178
The Welcome Wagon Oct 17, 2025
gkomo
T
What's it Worth? 2002 GT conv/auto
  • tonydetesta
  • Jan 7, 2026
  • What is it Worth?!?!?
Replies
3
Views
586
What is it Worth?!?!? Jan 21, 2026
Mustang5L5
S
Fox '87 GT can't get to stay running
  • spilly
  • Mar 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
604
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Yesterday at 9:59 AM
spilly
S
Who the hell puts the wrong spark plugs in a 3.8L?
  • snowstang
  • Mar 25, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
12
Views
381
1996 - 2004 SN95 Mustang -General/Talk- Apr 3, 2026
LILCBRA
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?