Aode To 5 Speed?

95NapalmGT · Dec 19, 2014

Hey guys I'm new here and i am a proud mustang owner as of march 2014
I have a tranny problem(and not the kind that deals with korea town in LA) with my Automatic, but instead of buying a new one I'm going to go to a 5 speed t5, my question is one that has been asked before-will an 88 fox gt t5 fit in my 95 gt?
I only ask due to being strapped for cash, my buddy is giving me all the necessary parts from his 88 vert for the swap if it will work. I've heard that I will need the input shaft from the old aode and that I'll have to probably shorten the driveshaft. Can anyone elaborate on this and tell me if it will work?

addermk2 · Dec 19, 2014

95NapalmGT said:
I have a tranny problem(and not the kind that deals with korea town in LA) with my Automatic, but instead of buying a new one I'm going to go to a 5 speed t5, my question is one that has been asked before-will an 88 fox gt t5 fit in my 95 gt?

Yes, in a manner of speaking.

95NapalmGT said:
I only ask due to being strapped for cash, my buddy is giving me all the necessary parts from his 88 vert for the swap if it will work.

You'd be better off grabbing a junkyard 4R70W (96-2001 Exploder 2wd) and swapping the TCC solenoid, shift solenoid, EPC solenoid, internal wiring harness and trans oil temp sensor from your AODE. Then J-mod the valve body. Instant 500hp capable transmission

95NapalmGT said:
I've heard that I will need the input shaft from the old aode and that I'll have to probably shorten the driveshaft. Can anyone elaborate on this and tell me if it will work?

You heard wrong.

To install a foxbody T5 in your car, (without any 94-95 T5 parts) you'll need a manual ECM, manual transmission wiring harness, pedal assembly, quadrant, clutch cable, fox bellhousing, fox fork, for T5, driveshaft spacer... and you'll probably get upset about mashing your hand into your radio every time you shift into 3rd.

You cannot use the input shaft from your AODE... that would not even come close to working.

95NapalmGT · Dec 19, 2014

I can't buy anything, to be frank
I lost my job so I'm in dire straits
But I can do the swap with said parts?
I can move the shifter, not a problem

addermk2 · Dec 19, 2014

No, you can't move the shifter. It's attached to the transmission.

And you still don't have the right wiring or computer.

95NapalmGT · Dec 19, 2014

Not if I install a different shifter
what wiring do I need?

addermk2 · Dec 19, 2014

Holy you're dense.

95NapalmGT · Dec 19, 2014

I'm not, I'm just new to mechanics stuff
No need to insult me

95NapalmGT · Dec 19, 2014

Shifter relocation plate*

addermk2 · Dec 19, 2014

For a t5? Not likely. You need to move it back 5/8"... and that's just not happening.

Besides, swapping to a T5 is not really a great idea. They aren't the best trans out there.

95NapalmGT · Dec 19, 2014

I know I know, but its the only option I have
I'm broke as fudge and christmas will not help much...

addermk2 · Dec 19, 2014

Deal with having a broken car, and find the trans I told you about.

You'll be much happier in the long run.

95NapalmGT · Dec 20, 2014

I'll keep it in my back pocket, but I would still like to know
1.what harness I need for this
2. What Ecm I need
Will the fox ecm and harness work?
Oh and
3. Check this out
http://www.autoworksparts.com/billet_shifter_relocation_kit.htm

addermk2 · Dec 20, 2014

95NapalmGT said:
I'll keep it in my back pocket, but I would still like to know
1.what harness I need for this
2. What Ecm I need
Will the fox ecm and harness work?
Oh and
3. Check this out
http://www.autoworksparts.com/billet_shifter_relocation_kit.htm

1. Already told you
2. Already told you
No the fox ecm and harness will not work
3. Won't work in your car. The shifter would be where the e - brake is.

95NapalmGT · Dec 20, 2014

Alright, well I know I need a manual ecm and harness, as you stated earlier
Any specifics? Like an sn95 harness?
I apologise for being a bit slow in regards to taking this all in, its just been a rough week

addermk2 · Dec 20, 2014

I forgot to mention that the clutch fork location will probably interfere with your exhaust, you'll need to modify your transmission cross member, you'll need new speedo gears, which might (will) involve taking the transmission apart.

Just get the 4r70w like I told you.

95NapalmGT · Dec 20, 2014

Alright about how much do those run for at a junkyard? And what other parts will I need to make it work?

95NapalmGT · Dec 20, 2014

Sorry for the double post
I just looked up and saw

Aode To 5 Speed?

95NapalmGT

Member

addermk2

95NapalmGT

Member

addermk2

95NapalmGT

Member

addermk2

95NapalmGT

Member

95NapalmGT

Member

addermk2

95NapalmGT

Member

addermk2

95NapalmGT

Member

addermk2

95NapalmGT

Member

addermk2

95NapalmGT

Member

95NapalmGT

Member

Similar threads

Aode To 5 Speed?

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency