are roller rockers loud?

[BlackVert]

yes or no?

 

[Pokageek]

No. Mine do not make any noise what-so-ever.

 

[Stanger007]

No, maybe you are thinking of solid lifters - they are a bit noisy.

 

[Dan95-5.0]

1.7 cobra rockers and there as quiet as stock was.

 

[final5-0]

All of them I have been around make more noise than the oem setup

If they ain't set right, they'll make a bit more racket

Grady

 

[BlackVert]

ok i won't worry about it any more. i just read a few guys over on corral saying they were disappointed with how noisy they are

 

[S/CBlack95GT]

ok i won't worry about it any more. i just read a few guys over on corral saying they were disappointed with how noisy they are

If you dont put enough preload on them sometimes they will clack slightly.

 

[Methodical]

No rocker noise on mine. Just have to set them up properly.

 

[tlee_20]

yeah they are noisy when they're out of adjustment. i aggravated a friend of mine because his were off a little and it sounded like an exhaust leak. other than that they are quiet.

 

[8950HO]

My Crane 1.7`s are quieter than the stock junk I took off.
I set the preload properly.

Don`t just bolt them down and go without checking and setting the correct preload like some idiots recommend.

 

[95Vert]

hey 8950ho, can you enlighten me about what preload you used. I torqued them down to 22lbs but mine still make some noise. I was recommended to the a set of slightly bigger push rods but not sure on what to do.