• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Drivetrain At my Witts end Speedo gear ‘NEVER MIND’

  • Thread starter Thread starter Aoneill5.0
  • Start date Start date Dec 17, 2022

Aoneill5.0

Member
Sep 30, 2022
48
5
18
EASTERN CANADA
Dec 17, 2022
#1
  • Dec 17, 2022
  • #1
disregard this post now,

Just took another look, the tranny gear was always there, but it’s gone now!
Was planning to change Clutch this winter so I’ll get at the gear then..

Hi folks, 89 GT Manual,

Been having ‘NEW SPEEDO GEAR ‘ issues.

I replaced red 16 tooth gear with Red 21 Tooth gear as called for with my setup.

Speedo in car will work fine for 15 mins then drop to Zero and nothing..

Have had it out 3-4 times
Gear is not chewed up at all.

Spun it up on drill ‘left hand turn’ while out and works fine in car.
Once re-installed does same thing. Dies after a short time.

It’s a Ford OEM gear,
Looks exactly the same, measures the same, just more teeth.

Am I missing something??

Cleaned housing on Tranny
Installs fine
Bolts in fine,
Almost like it’s not meshing properly

Or

Maybe an issue with the other end.

No VSS either.

Any suggestions are welcome.

It’s bang on while working as well..just won’t stay working


AGHHHHHHH!!!
 
Last edited: Dec 17, 2022

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,265
17,952
224
Massachusetts
Dec 18, 2022
#2
  • Dec 18, 2022
  • #2
How is the connection on the other end? Does it engage fully, or enoigh?

It could be barely engaging when you install but then slip out of the speedo head during use.

When it stops working, How do you “reset” it? What cable are you using? A pioneer cable?
 

Aoneill5.0

Member
Sep 30, 2022
48
5
18
EASTERN CANADA
Dec 18, 2022
#3
  • Dec 18, 2022
  • #3
The Tail end shaft gear isn’t there anymore

When I looked late last night again

Was likely just holding on

So
Now it’s gearbox removal time.
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,265
17,952
224
Massachusetts
Dec 18, 2022
#4
  • Dec 18, 2022
  • #4
Speedo clip failed. Very common problem.
 

Aoneill5.0

Member
Sep 30, 2022
48
5
18
EASTERN CANADA
Dec 18, 2022
#5
  • Dec 18, 2022
  • #5
Ok

Read about it quite a bit..

Are there many risks running the car before the repair??
Debris in the gearbox???

Thanks
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,265
17,952
224
Massachusetts
Dec 18, 2022
#6
  • Dec 18, 2022
  • #6
unlikely. It’s been a common failure and I’ve never heard of damage due to the little tab breaking off.


The little vertical nub is what breaks and the main body stays with the gear which just gets pushed off to the side. The little nub is likely sitting on the bottom of the trans and hopefully caught up in the magnet.

But, there’s always a long shot it gets stirred up into the gears.
 

Attachments

  • 4E4D9717-4A3D-4246-BDDE-005E369CDAD7.webp
    6.6 KB · Views: 135

Aoneill5.0

Member
Sep 30, 2022
48
5
18
EASTERN CANADA
Dec 18, 2022
#7
  • Dec 18, 2022
  • #7
Yes! Makes sense!

Thanks again..
 
You must log in or register to reply here.

Similar threads

Drivetrain Speedo gear ate itself
  • keel
  • Aug 15, 2024
  • Fox 5.0 Mustang Tech
Replies
7
Views
725
Fox 5.0 Mustang Tech Aug 15, 2024
AeroCoupe
D
66 Coupe Progress Thread
  • DTCRAWLEY
  • Apr 19, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
43
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Jun 17, 2026
DTCRAWLEY
D
O
Progress Thread LTD-ing
  • OX1
  • Mar 15, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
391
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Apr 6, 2026
OX1
O
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
964
1965 - 1973 Classic Mustangs -General/Talk- Jun 20, 2026
gray owl
G
B
Questions About T5 Manual
  • Blackout67
  • Apr 13, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
10
Views
619
1996 - 2004 SN95 Mustang -General/Talk- Apr 22, 2025
89ripper
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?