• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

autometer?

  • Thread starter Thread starter jimc347
  • Start date Start date Oct 27, 2005
J

jimc347

New Member
Sep 25, 2005
77
0
0
Oct 27, 2005
#1
  • Oct 27, 2005
  • #1
i had bought an autometer watertemp gauge mechnical. the senser that goes into the top of the mainfold that screws in don't fit. do you have to buy that seprate??? i think it screws in on the drivers side the front of the manifold???
 

marine_2003

Member
Jun 6, 2005
427
0
16
Lake County, FL
Oct 27, 2005
#2
  • Oct 27, 2005
  • #2
there is an adapter that you need to buy.
 

RYC CUKR

Founding Member
May 19, 2002
1,437
1
38
Orlando
Oct 27, 2005
#3
  • Oct 27, 2005
  • #3
autometer part #2263
$6 from summit
 
J

jimc347

New Member
Sep 25, 2005
77
0
0
Oct 27, 2005
#4
  • Oct 27, 2005
  • #4
thanks guys
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Oct 27, 2005
#5
  • Oct 27, 2005
  • #5
A parts store might have an adapter for their own line of gauges (Sunpro, etc). Some guys have just gone and got that kit and used the adapter.

Good luck.
 
J

jerryD

Founding Member
Mar 16, 2000
1,061
0
37
Gladstone, MO
Oct 27, 2005
#6
  • Oct 27, 2005
  • #6
hardware store should have a bung. 3/8 on the intake side. just have to bring the gauge with you and measure as well.
 
T

TheUser

Active Member
Jul 25, 2003
1,859
1
36
Springfield, MO
Oct 27, 2005
#7
  • Oct 27, 2005
  • #7
HISSIN50 said:
A parts store might have an adapter for their own line of gauges (Sunpro, etc). Some guys have just gone and got that kit and used the adapter.

Good luck.
Click to expand...
That's what I did; didn't have time and didn't want to wait for a summit order to come through...they're very fast, but they couldn't get the part to me in half an hour I got a bag of adapters at a local auto store (O'Reily's) for $6-7.
 
T

TheUser

Active Member
Jul 25, 2003
1,859
1
36
Springfield, MO
Oct 27, 2005
#8
  • Oct 27, 2005
  • #8
jerryD said:
hardware store should have a bung. 3/8 on the intake side. just have to bring the gauge with you and measure as well.
Click to expand...
I have read, no personal experience though, that hardware store adapters don't allow the sensing mechanism (can't think of the name) to submerge in the water enough causing inaccurate readings That's why I stuck w/ the auto parts store.
 
You must log in or register to reply here.

Similar threads

R
Electrical 1987 Map Light
  • Riley Barth
  • May 30, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
426
Fox 5.0 Mustang Tech Jul 6, 2026
Riley Barth
R
Engine New factory manifold no start
  • Fishnchips
  • Oct 15, 2026
  • 1994 - 1995 Specific Tech
Replies
13
Views
398
1994 - 1995 Specific Tech Oct 22, 2026
DadLife0724
D
Exhaust Difficulty of fixing exhaust leak at manifold
  • dqureshi06
  • Aug 27, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
348
Fox 5.0 Mustang Tech Aug 28, 2026
General karthief
D
Electrical Weird door wiring issues
  • Dakar09
  • Oct 20, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
204
Fox 5.0 Mustang Tech Oct 21, 2026
Dakar09
D
A
A/F ratio gauge install questions.
  • AngryH58
  • Sep 24, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
243
1996 - 2004 SN95 Mustang -General/Talk- Oct 22, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?