Hmm ford motorsport high flow z heads anybody running theseM-6049-Z304A* . These heads seem to decent compared to afr or edelbrock TYPICAL AIRFLOW (@ 28'' OF H2O DEPRESSION) WITH 2.02 INTAKE VALVE, 1.60 EXHAUST VALVE AND COMPETITION VALVE JOB
LIFT INTAKE FLOW (SCFM) EXHAUST FLOW (SCFM)
.050 31.1 26.4 exhaust on this side
.100 64.6 55.8
.150 103.0 84.6
.200 135.3 113.3
.250 167.0 146.8
.300 199.0 171.6
.350 227.2 190.2
.400 245.2 200.4
.450 259.8 207.2
.500 271.9 212.8
.550 277.3 218.1
Going to this site they outflow most heads http://www.allfordmustangs.com/Detailed/630.shtml Just wanted to add this because alot of cars I see run heads other than ford racing units. I ditched the darts for these guys.
LIFT INTAKE FLOW (SCFM) EXHAUST FLOW (SCFM)
.050 31.1 26.4 exhaust on this side
.100 64.6 55.8
.150 103.0 84.6
.200 135.3 113.3
.250 167.0 146.8
.300 199.0 171.6
.350 227.2 190.2
.400 245.2 200.4
.450 259.8 207.2
.500 271.9 212.8
.550 277.3 218.1
Going to this site they outflow most heads http://www.allfordmustangs.com/Detailed/630.shtml Just wanted to add this because alot of cars I see run heads other than ford racing units. I ditched the darts for these guys.