Bad Brake Pedal Rod? Or Just Bad Switch?

H

Hexberry

New Member

Mar 12, 2017

2

0

1

Mar 12, 2017

#1

• Mar 12, 2017

• #1

2003 GT Brake pedal stop light switch only works when i press to the bottom of the pedal. I replaced the switch but now its doing it again. Anyone have a fix for this? Also the switch wobbles a lot, is that normal? Or if there is a thread with this fix can someone link me to it, i didnt find anything.

 

D

Deleted member 38176

Mar 12, 2017

#2

• Mar 12, 2017

• #2

Try checking the fuse. I had a similar problem and turned out that I kept blowing the fuse

 

H

Hexberry

New Member

Mar 12, 2017

2

0

1

Mar 13, 2017

#3

• Mar 13, 2017

• #3

They light up, but i have to press very hard. And sometimes when i lightly press the pedal they will turn off and start blinking as if it was make a bad contact. All wiring is good it seems to be the switch. Ive replaced it twice and still does the same thing.

 

Mustang5L5

That is…until I whipped out my Bissell

Mod Dude

Feb 18, 2001

43,345

18,074

224

Massachusetts

Mar 15, 2017

#4

• Mar 15, 2017

• #4

There are some bushings and spacers usually installed along with the switch. If installed incorrectly, or omitted, they usually cause the issues you are experiencing.

I'd see if I can track down someone who has a pic of their installed switch. and compare it to yours to see if you are missing any of the pieces or they are installed incorrectly