• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Balancer outter ring slipped...

  • Thread starter Thread starter Jrock909
  • Start date Start date Apr 24, 2007
J

Jrock909

Member
Mar 6, 2007
36
0
6
Apr 24, 2007
#1
  • Apr 24, 2007
  • #1
Guys what are the symptoms of a harmonic balancer that has slipped on it's outer ring? I am trying to find the best timing for my 302 and I can't get the engine to ping at all lol!
 

4G-KDMP

10 Year Member
Jul 23, 2005
935
19
39
CA
Apr 24, 2007
#2
  • Apr 24, 2007
  • #2
bulging and sign of cracking of the material between the inner and outer ring is one symptom.

the engine needs to be under a load before you'll hear it ping, just reving it up won't make the engine ping.
 
J

Jrock909

Member
Mar 6, 2007
36
0
6
Apr 24, 2007
#3
  • Apr 24, 2007
  • #3
What a good load to get the engine to ping under...? Another question would be when I put the spout connector back in, will the timing marks be readable with a timing light?
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Apr 24, 2007
#4
  • Apr 24, 2007
  • #4
When mine went bad it caused a huge vibration and when it sliped off the hub the engine could not be ran without it jumping around in the engine compartment. It caused a motor mount to break.

Allen
 
J

Jrock909

Member
Mar 6, 2007
36
0
6
Apr 24, 2007
#5
  • Apr 24, 2007
  • #5
I mean can you take the belt off and wiggle the outer ring around to see if it's bad? What is a good load though to put the engine under to ping besides driving up a hill. Can you power brake the truck would that work?
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Apr 24, 2007
#6
  • Apr 24, 2007
  • #6
if you see any rubber sticking out between the ring and hub you need to replace it. If the ring flys off at speed you can lose an engine....
 

4G-KDMP

10 Year Member
Jul 23, 2005
935
19
39
CA
Apr 24, 2007
#7
  • Apr 24, 2007
  • #7
Jrock909 said:
What a good load to get the engine to ping under...? Another question would be when I put the spout connector back in, will the timing marks be readable with a timing light?
Click to expand...


like when the motor need to pull hard at lower rmps. say like in 5th gear doing 40mph and pushing hard on the gas pedal to make it pick up speed, is an example.

as soon as you plug the spout back in the computer takes over on the timing.
 
You must log in or register to reply here.

Similar threads

P
Engine Help 331 stroker
  • pdmount
  • Feb 19, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
406
Fox 5.0 Mustang Tech Feb 21, 2026
pdmount
P
Drivetrain How much resistance, if any at all, is normal on a new 1st gear and synchro on a WC T5 transmission?
  • sleep-e
  • Jan 21, 2026
  • Fox 5.0 Mustang Tech
Replies
2
Views
349
Fox 5.0 Mustang Tech Jan 22, 2026
sleep-e
L
1996 harmonic balancer crank bolt. Help!
  • Lost in Palm Bay
  • Jul 21, 2026
  • SN95 V6 Mustang Tech
Replies
6
Views
316
SN95 V6 Mustang Tech Jul 24, 2026
Lost in Palm Bay
L
Engine Looking for suggestions and or ideas
  • PonyGTrider
  • Aug 25, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
735
Fox 5.0 Mustang Tech Sep 7, 2026
PonyGTrider
Teflon O-ring for power steering
  • revhead347
  • Feb 28, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
404
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 28, 2026
revhead347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?