Balljoint question

I clearly need balljoints but have a couple questions.

If I replace the balljoints with Steeda X2's do I need to add the Steeda bumpsteer kit along with the offset rack bushings.

Shocks are KYB, springs are Ford M-5300-B which lowered the car just over an inch.

Do I need to add both Steeda parts or would I be ok with just the X2's?

StangGT1995 said:

IIRC, you don't even need the X2 balljoints with 1" of lowering, but they definitely couldn't hurt. I'd start there, but chances are the offset rack bushings aren't necessary.

Click to expand...

The offset bushings are part of the kit from Stang Suspension so they don't need to be put on unless needed. I need to get them installed NOW so waiting to a shipment is out of the question. I'll go by Bumper To Bumper Monday morning and see if they have ones with grease fitting and if not I'll have NAPA deliver them.

Thanks for the reply.