Battery relocation

[95opal]

1/o or 1 ott is thicker than 2ga

 

[trav_19]

no i believe there is 2 guage 1 guage 0 guage 1/0 then 2/0 but i could be wrong its a big jump

 

[Kornnut]

I got a free box(thanks rio96gt) yesterday and will be doing this soon.

 

[BlooDReigN]

Here's a pic of where I put it in my car

You can just crouch down to the ground and hit the switch if you know where it is.

 

[turbogt]

Welding supply....

Don't use welding cable.. It is not very flexible... Car audio/amplifier wire is the best... If you are using 1/0, stinger Expert is the best there is... It can be tied in a tight knot.....very flexible and easy to route...

 

[gcomfx.com]

Don't use welding cable.. It is not very flexible... Car audio/amplifier wire is the best... If you are using 1/0, stinger Expert is the best there is... It can be tied in a tight knot.....very flexible and easy to route...

I have cable already... but what's the price difference for the flexible stuff?

 

[turbogt]

depends on how much markup they have. Audio shops have really high markups. Retail is $6 a foot. Cost is 1.85.. Anywhere between those two.

 

[go-stang5.0]

you know the kill switches are rated to only so much before the blow out, so if you have a complete short after the kill switch, it should blow out before anything melts. Plus, on a bad day your starter could blow out a several hundred amp fuse just from cranking. I think thats why kill switches are required... What I'm saying is that you cant really put a fuse b/w the battery and starter.

And my kill switch its pretty ghetto riged. But it has worked fine for the last 3 yrs. I'll post pics of my setup in the next few days.