BBK Chrome valve covers !

fastfox86 said:

Don't waste your time on a Phenolic spacer unless you need the clearance. They don't do much.

Click to expand...

+1 to that, and also make sure you have the clearance with your hood. ive had both edelbrock rpm II and trick flow R series intakes and if i didnt have a 2.5 inch cowl there would be no way the hood would be closing.


as for the fabbed aluminum covers... just get a set and drill a hole for a fill cap or breather in them, its not that difficult, and if you dont feel comfortable with that then take it to a local machine shop and have them put the hole it. Something like that would cost $20 to $30 bucks max.