Best All In One Complete Gt40 Gasket Set

sen2two

I've been lubing and pulling it all morning

5 Year Member

Jul 18, 2013

396

58

59

Jan 31, 2016

#1

• Jan 31, 2016

• #1

I have a complete top end set up ready to go on. The one I'm looking at is Fel-Pro HS9333PT.

Amazon product ASIN B000C2EAXEView: http://www.amazon.com/gp/product/B000C2EAXE?psc=1&redirect=true&ref_=ox_sc_sfl_title_3&smid=A1COIXT69Y8KR


Is there a better all in 1 set than this?

 

madspeed

Colonel Mustard

Founding Member

Nov 29, 1999

8,914

1,332

204

a van down by the river

Jan 31, 2016

#2

• Jan 31, 2016

• #2

do you really need all that? Or just intake, head and exhaust gaskets?

 

sen2two

I've been lubing and pulling it all morning

5 Year Member

Jul 18, 2013

396

58

59

Jan 31, 2016

#3

• Jan 31, 2016

• #3

I'm swapping heads and the intake. So I would need exhaust gaskets, intake gaskets, head gaskets, and valve cover gaskets at a minimum. The other stuff is really just extras.

But I havn't found any there gasket set that included just what I need...

 

stykthyn

I want to measure mine. It doesn't look that tall.

15 Year Member

Jul 6, 2006

5,232

2,652

223

gainesville

Feb 1, 2016

#4

• Feb 1, 2016

• #4

Do yourself a favor and get the reusable valve cover gaskets. The cork in that kit is bull

 

Reactions: FoxMustangLvr

sen2two

I've been lubing and pulling it all morning

5 Year Member

Jul 18, 2013

396

58

59

Feb 1, 2016

#5

• Feb 1, 2016

• #5

stykthyn said:

Do yourself a favor and get the reusable valve cover gaskets. The cork in that kit is bull****

Click to expand...

Good point. So really the best way to do it is buy the head gaskets, intake gaskets, and valve cover gaskets all separately.

That kind of sucks...

 

stykthyn

I want to measure mine. It doesn't look that tall.

15 Year Member

Jul 6, 2006

5,232

2,652

223

gainesville

Feb 1, 2016

#6

• Feb 1, 2016

• #6

Cherry pick the ones you want from summit. I'm fairly positive it will be the same price as that kit.

 

hoopty5.0

mechanicus terribilis

15 Year Member

Dec 14, 2010

7,781

6,935

214

SW Houston

Feb 1, 2016

#7

• Feb 1, 2016

• #7

Look at Rock auto as well. Their prices are hard to beat

 

mikestang63

SN Certified Technician

Aug 27, 2012

11,606

8,859

214

In the garage

Feb 1, 2016

#8

• Feb 1, 2016

• #8

ok you want the blue rubber VC gaskets with the steel inserts
for Head gaskets 9333pt1
Intake gaskets Felpro 1250S3- steel inserts . do not use the cork end rails. either use the rubber ones or what I do is a thick bead of Right Stuff
You'll need the upper to lower intake gasket for a GT40, explorer, Cobra
Exhaust- think its 1415?
Then get Felpro timing cover, thermostat gasket, Throttle body, EGR
If you are replacing your top end then I highly recommend you also replace

• thermostat
• timing chain and gears
• harmonic balancer with a good pioneer, romac, or other SFI
• water pump
• Timing cover seal
• head bolts- get ARP bolts or studs
• intake, exhaust, timing cover, water pump bolts- ARP

let me know if you need specific part #'s on what I have used