• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

BLACK BLACK Spark plugs

  • Thread starter Thread starter Nottoofast50
  • Start date Start date Aug 18, 2005
Prev
  • 1
  • 2
First Prev 2 of 2

txstang84

15 Year Member
May 21, 2005
1,639
42
69
Tuscola, tx
Aug 18, 2005
#21
  • Aug 18, 2005
  • #21
great googly moogly...i think we might need to bring daggar or jrichker into this one...
 
N

Nottoofast50

Founding Member
Dec 9, 2000
386
0
0
Cali
Aug 18, 2005
#22
  • Aug 18, 2005
  • #22
Well i guess i'm gonna put it all back together tommorow... what can i clean the carbon off the plugs with? or should i buy new ones, these are only a month old I'm hoping that some odd c hance the plugs where just carbon fouled to hell and the tfi was causing the problem but even after i replaced it the plugs where too far gone to run right....
 

txstang84

15 Year Member
May 21, 2005
1,639
42
69
Tuscola, tx
Aug 18, 2005
#23
  • Aug 18, 2005
  • #23
you could use a wire blush or a toothbrush and some solvent...
 
N

Nottoofast50

Founding Member
Dec 9, 2000
386
0
0
Cali
Aug 18, 2005
#24
  • Aug 18, 2005
  • #24
Oh I might also ad i ran the cylinder balance test with a code scanner and it came up number 4 bad everytime. :
 
J

jerry beach

Founding Member
May 20, 2002
2,671
0
46
Ocala,FL
Aug 19, 2005
#25
  • Aug 19, 2005
  • #25
Before you run the cylinder balance again, try and swap the injector plugs on #4 and the one next to it. If the problem stays in the same cylinder, it is mechanical. If it follows the plug swap its electrical.
 
N

Nottoofast50

Founding Member
Dec 9, 2000
386
0
0
Cali
Aug 19, 2005
#26
  • Aug 19, 2005
  • #26
jerry beach said:
Before you run the cylinder balance again, try and swap the injector plugs on #4 and the one next to it. If the problem stays in the same cylinder, it is mechanical. If it follows the plug swap its electrical.
Click to expand...

Wouldn't that cause the car to miss really bad?
 
8

87'GTstang

New Member
Feb 16, 2004
1,025
0
0
Aug 19, 2005
#27
  • Aug 19, 2005
  • #27
Nottoofast50 said:
Wouldn't that cause the car to miss really bad?
Click to expand...
This is exactly what I would recommend. It's a common trick in the world of fixing cars, you swap a known good parts for a possible bad part and see if it goes away or not.

In other words, you swap the #4 injector with say the #3 injector (since they are side by side on the passenger bank). Then re-run your engine and check the balance test. If you are still getting that #4 is bad, then it is a mechanical problem, BUT if the problem moves to #3, then you have a bad injector - so replace it.

How does it respond in the higher rpm range, or does it just get worse from idle up?
 

txstang84

15 Year Member
May 21, 2005
1,639
42
69
Tuscola, tx
Aug 19, 2005
#28
  • Aug 19, 2005
  • #28
87'GTstang said:
This is exactly what I would recommend. It's a common trick in the world of fixing cars, you swap a known good parts for a possible bad part and see if it goes away or not.

In other words, you swap the #4 injector with say the #3 injector (since they are side by side on the passenger bank). Then re-run your engine and check the balance test. If you are still getting that #4 is bad, then it is a mechanical problem, BUT if the problem moves to #3, then you have a bad injector - so replace it.

How does it respond in the higher rpm range, or does it just get worse from idle up?
Click to expand...


good call-wish i would've thought of that, but i think he mentioned something about that all the plugs were heavily soot fouled...does this play into the just one bad injector if all of the plugs were sooted out?
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

C
Electrical HELP! 1989 5.0 Stick, Voltage Bleed onto Ignition Trigger wire
  • ChickenDeluxe
  • May 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
221
Fox 5.0 Mustang Tech May 24, 2026
ChickenDeluxe
C
B
Engine Another no start after washing engine bay
  • bruno
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
659
Fox 5.0 Mustang Tech May 7, 2026
AeroCoupe
J
'04 3.8L V6 mineral deposits and oil on #3 cylinder. Does it need a rebuild or something simpler?
  • joeybuddy96
  • Mar 18, 2026
  • SN95 V6 Mustang Tech
Replies
5
Views
249
SN95 V6 Mustang Tech Jun 9, 2026
joeybuddy96
J
S
Fox '87 GT can't get to stay running
  • spilly
  • Mar 29, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
27
Views
777
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 20, 2026
spilly
S
Who the hell puts the wrong spark plugs in a 3.8L?
  • snowstang
  • Mar 25, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
12
Views
427
1996 - 2004 SN95 Mustang -General/Talk- Apr 3, 2026
LILCBRA
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?