• Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech

Blend Door Actuator?

  • Thread starter Thread starter MattJ
  • Start date Start date Nov 9, 2013

MattJ

Member
Dec 17, 2012
4
0
12
Nov 9, 2013
#1
  • Nov 9, 2013
  • #1
I am having problems with the blend door actuator. It seems to be a common issue in the 2007 Mustangs. I researched it, but here's my problem. I have no idea which part I need to replace. So I'm hoping someone here can help me out.

When I turn my car on, you get the clicking noise for about ten seconds and then it goes off. My defrost works perfectly fine, rear defrost as well. Cold air always works fine too. My problem is either when I switch from cold to hot, sometimes the air never changes and just stays cold. Or if I have the defrost on(heat) and want to switch it to the vents, sometimes it doesn't switch. Last night I had it on defrost and when I switched the control to the vents, the defrost stayed on.

So with that all said, O'Reilly Auto Parts seems to have a ton of options. I am told there's only three blend door actuators, so I'm confused how they have so many options. But, those options include: Air Inlet Door, Defrost Door, Panel Airflow, Recirculation mode door, and mode door actuator.

Now just me taking a guess here, I would say it's the Mode Door Actuator. That's a Motorcraft part listed on O'Reilly's site. But, I'm just not sure what all the others are. Could it be the defrost door? Defrost works fine front and back, but it sometimes doesn't switch between defrost and vent. Anyways, thanks for all help. Just trying to figure out what I need before I tear everything apart and fix the wrong thing
 
N

Nicholas Durante

New Member
Nov 6, 2013
8
0
2
Nov 9, 2013
#2
  • Nov 9, 2013
  • #2
I would think that there would be a way during your teardown to test the sound to see where it is actually coming from. Additionally, if they are items that can be returned as unopened, you can get one of each and return the ones you dont replace. Just a thought.
 

Silver bullett

New Member
May 9, 2012
2
0
2
Nov 15, 2013
#3
  • Nov 15, 2013
  • #3
I just had the same problem about a week ago except just no heat. Had to remove the blend door motor to get the part # for dealership.When installing the motor the gear can only slide in one way so you have to switch the temp. Control to make the gear spin.
 

rd

Founding Member
Jan 12, 2000
3,316
63
109
Ocean Springs MS
Jan 31, 2014
#4
  • Jan 31, 2014
  • #4
Had the mode door fail on Bullitt. Its the only one you can change w/o removing the dash iirc

The dealer had to look at the motor to match the new one properly when they changed it.

Fixed later under the warranty on the replacement. Works fine since.
 
S

Sandrad

New Member
Nov 13, 2018
1
0
1
Texas
Nov 13, 2018
#5
  • Nov 13, 2018
  • #5
I am having a similar problem. I am not getting any heat, it is blowing air, cold air. I replaced the door blend actuator because it was making the clicking noise. I still do not have heat. Like I said, it is blowing air, so I do not think it could be anything expensive.
I could take any suggestions, please.
One more thing, does anyone know what each actuator is for? I have been told that one of the actuators could be the cause of the heat not coming through.
 
You must log in or register to reply here.

Similar threads

B
A/C Issues
  • Boats90GT
  • Wednesday at 3:17 PM
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
60
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Thursday at 8:54 AM
Mcmahst
N
Power door lock motor Question
  • NYFox
  • Mar 15, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
190
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 17, 2026
NYFox
N
Door wire harnesses 1996 GT
  • Adizzle843
  • Feb 5, 2026
  • SN95 4.6L Mustang Tech
Replies
7
Views
301
SN95 4.6L Mustang Tech Feb 17, 2026
Adizzle843
P
93 Electrical Gremlins
  • Parmgeddon93
  • Jun 6, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
199
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 7, 2025
Bullitt347
S
01 GT DRIVERS SIDE DOOR LOCK CYLINDER LINKAGE
  • Scwhitten
  • May 13, 2026
  • SN95 4.6L Mustang Tech
Replies
2
Views
75
SN95 4.6L Mustang Tech May 21, 2026
n0v8or
N
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 2005 - 2014 S-197 Mustang -General/Talk-
  • 2005 - 2009 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?