• Mustang Forums
  • Special Production

Roush Blower Chirp?? Bearings?

  • Thread starter Thread starter Ebbsnflows
  • Start date Start date May 20, 2007
E

Ebbsnflows

New Member
Jun 7, 2000
15
0
1
Southern MD (unfortunately)
May 20, 2007
#1
  • May 20, 2007
  • #1
Does anyone else get a "chirping" sound from their blower after letting off the gas? When I accelerate (getting into boost) and the let off the gas, I get a "high pitched flutter" or "chirping" from the blower? I've popped the hood, and manually acuated the thottle, and I can tell it's coming from the Blower snout.

I'm concerned that I have bad bearings. Is there a way to re-oil or grease the blower bearings?

Anyone else have this issue?
 

S351R"Animal"

20+ Year Stangneter
Dec 3, 2002
708
0
16
Manhattan, KS
May 21, 2007
#2
  • May 21, 2007
  • #2
Under decelleration you will get the sound from the bypass valve. It will sound like fluttering. It will only happen when the car is under boost. If you have a noise near the snout then you need to remove the blower belt and check for end play. if you can move the snout up and down then there is a problem. generally though when the bearings go out you will notice a drop in boost from normal. It will also have a louder metal on metal sound. It may also leak oil out the front. There probably isn't anything wrong unless you are seeing less boost.
 

marcus95

Active Member
Jan 26, 2004
2,133
0
46
California
May 21, 2007
#3
  • May 21, 2007
  • #3
Almost every Series II blower I have seen has some play in the pulley. It's very common. As far as the "chirping" sound you may only need to change the pulley to eliminate it.

Call Joe at Chicane for a new pulley and additional advice.
 
E

Ebbsnflows

New Member
Jun 7, 2000
15
0
1
Southern MD (unfortunately)
May 21, 2007
#4
  • May 21, 2007
  • #4
After talking to others (and reading Animals post), I've come to the conclusion that it's the boost bypass valve, as they describe the sound exactly. That, plus It only occurs during decel. If it did it during idle or even acceleration, then I'd be concerned about a mechanical issue.

Since my Lightning doesn't make that noise (with a similar blower), I became concerned. I didn't even know that the Saleen blowers had a bypass valve (I just bought it 2 weeks ago), but I'm slowly learning the various quirks of the Saleen.

FWIW, I already have a Chicane blower pulley on it.

Thanks for the input guys.
 
You must log in or register to reply here.

Similar threads

B
90Gt squeal/chirp when hot
  • Bvoss59
  • Jun 12, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
695
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 14, 2025
General karthief
89 LX Electrical Troubles
  • fun331
  • Oct 25, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
5
Views
353
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 27, 2025
fun331
P
2002 T5 transmission vibration issue
  • puffoo
  • Feb 22, 2026
  • SN95 V6 Mustang Tech
Replies
0
Views
181
SN95 V6 Mustang Tech Feb 22, 2026
puffoo
P
J
2004 Mustang 3.8L V6 vibrations above 65 MPH and differential leaks
  • joeybuddy96
  • Mar 16, 2026
  • SN95 V6 Mustang Tech
Replies
16
Views
597
SN95 V6 Mustang Tech Jul 14, 2026
joeybuddy96
J
0
'04 V6 running rich excessively on both banks
  • 04DSGVert
  • Oct 26, 2025
  • SN95 V6 Mustang Tech
Replies
2
Views
352
SN95 V6 Mustang Tech Oct 27, 2025
04DSGVert
0
Share:
Bluesky Email Share Link
  • Mustang Forums
  • Special Production
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?