I know it reads both,but if its for looks just to watch the needle move i understand that,but on MY car i have on the blower pressure unit off the compressor,if i put it on manifold vacume it will still read blower pressure???andrewsg said:Err, if i remember right a boost gauge reads both vaccum and boost -- i.e. you can do this through a tap in the manifold or manifold vaccum etc. At least thats how it works on my carb'd turbo'd car.. i have it running off manifold vaccum and it works fine.. also have a standalone and it shows the same.
brad8750 said:You can tap into any red vacume line on the car or one that goes to the vacume tee. Some blowers such as vortech put a 1/8 ntp fitting on the outlet of the blower, You can install it there also. Ether way it is going to read the same
88_GT_5_oh said:just take it off the tree..... when i had my upper off i had an extra hole with a cap in it, so i threaded my boost gauge right to the intake.
brad8750 said:that is the vac tree that we are talking about
iskwezm said:I know it reads both,but if its for looks just to watch the needle move i understand that,but on MY car i have on the blower pressure unit off the compressor,if i put it on manifold vacume it will still read blower pressure???
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?
We use cookies and similar technologies for the following purposes:
Do you accept cookies and these technologies?