Where does it attach? We dont have an extra hole the right size on our intake manifold. Any body have an pictures? Any help greatly appreciated. Oh ya, Almost forgot. 66 Fastback, 289, 4bbl intake, c4. If you guys need anything else just ask.
Thanks
I've got mine hooked to the big port on the back of the carb, you can also use a vacume tree and put a T in your existing line. Should work like a champ
Any vacuum source that comes from below the butterflies will work, the big one on the base of the carb will do, but it is usually for the PVC, factory cars used a brass distribution block off the back of the intake for the supply.
I hooked mine into the PCV port at the back of the carb with a brass T. I'm considering drilling and tapping a new port on the back of the intake manifold like my Air Gap manifold had.