but did you replace the bulbs?
i know i know the 3rd brake light is out but..
the third brake light could have been out before all this..
the bulbs have two different filements inside.. one for parking lights and 1 for braking.
otherwise brake light pedal switch,, or the bulb socket itself.
it would have blown a fuse if a wire was shorting out..
are the wires before both sides of the plug connection the same amount and colors??
check the stupid things.
i know i know the 3rd brake light is out but..
the third brake light could have been out before all this..
the bulbs have two different filements inside.. one for parking lights and 1 for braking.
otherwise brake light pedal switch,, or the bulb socket itself.
it would have blown a fuse if a wire was shorting out..
are the wires before both sides of the plug connection the same amount and colors??
check the stupid things.
you need to unplug the harness again and attach a test light while someone else steps on the brakes, start probing wires until you find power, when you do
repeatedly step on and off the brake and the test light should do the same.
make sure you got a good grounding point for your test light...
repeatedly step on and off the brake and the test light should do the same.
make sure you got a good grounding point for your test light...