break in dyno numbers

[SaleenGT2001]

got the car on the dyno to get some drivability issues solved today. we made 2 pulls just to see how she was doing

pull #1
3900 RPM
303 HP 412 TQ



pull #2

4900 RPM
446 HP 491 TQ


i cant wait to see what it does on a full pull to 7K!!!

 

[FoxRod87]

Nice!!!

 

[BennyBlown2v]

Nice dude!

 

[BurningRubber]

Man you got 2100 RPM more to go!!!

Haha, should be a beast!!!!

 

[SaleenGT2001]

i dont want to stop driving it!!!!

i put over 100 miles on it since 7 tonight

 

[EPIK]

i dont want to stop driving it!!!!

i put over 100 miles on it since 7 tonight

Congrats bro....Those are some great numbers....

 

[SonicStangGT]

Nice numbers, I bet your glad to drive your car again, good luck on the next dyno run.

 

[old_blue]

good to see it all come together.

 

[Stan Weiss]

Nice numbers. But RPM torque and HP are mathematically linked.
4900 RPM 491 Torque = 458 HP
4900 RPM 446 HP = 478 Torque

4770 RPM 491 Torque = 446 HP
I would ask the dyno operator what ups.

 

[jivepepper]

Can't wait to see the final numbers, track times and traps.

 

[SaleenGT2001]

Nice numbers. But RPM torque and HP are mathematically linked.
4900 RPM 491 Torque = 458 HP
4900 RPM 446 HP = 478 Torque

4770 RPM 491 Torque = 446 HP
I would ask the dyno operator what ups.

this wasnt an actual tune session. just a base tune. the car only had 11* of timing in it and the HP was just starting to climb when we shut it down.

 

[Stan Weiss]

I just wanted to point out it is impossible to have both 491 torque and 446 HP at 4900 RPM. If they are both at the same RPM that can only happen at 4770 +- RPM and the dyno reported RPM is wrong.

 

[SaleenGT2001]

it was peak numbers

 

[deftsound]

very nice! that thing is going to be a monster

 

[Stan Weiss]

Do you have a printout from the dyno run / tune?

 

[SaleenGT2001]

no, it was just a couple of pulls to check the AF to make sure it was good to put the break in miles on. i will get the graphs when it is tuned in a few days and post them up for you

 

[SilverBullet00]

Congrats man! Glad she is running.. I cant wait to see what she really makes