can i use my 2000 Gt parts on a 2001 Bullit?...... the only difference between the two is just the intake manifold right?...suspension and exhausr and motor are exactly the same correct?
bullitt brakes were not black, they are red with a white pony. Mach brakes, same hardware, just black. All cobras had the cobra logo in white with a black or red caliper
Since I own a bullitt i probably should know. Bullitts come with many different things from ford. The brakes are red with the front two calipers having a white pony on them. Also you know that the intake manifold is different however so are the valve covers. The bullitt also comes with different diameter swaybars and slightly different springs. Owning a 2004 gt and this 01 bullitt i know for a fact that the bullitt suspension is alot better in the handling department as opposed to a regular gt. Some have said it is the next best handling mustang to the cobra r
Cant forget the engine pullies, interior, gauges, c-pillars, shift knob, absence of fog lights, absence of wing, and different fuel door. The difference in the suspension involves bigger sway bars as stated, subframe connectors, and the springs and shocks are different, they drop the car about .75" and the shocks and struts are made by tokico. Thats about all i can think of off the top of my head. But yes all the parts are swapable. If you are going to buy parts for it, they are the same as buying for a gt, except for the brakes.
Cant forget the engine pullies, interior, gauges, c-pillars, shift knob, absence of fog lights, absence of wing, and different fuel door. The difference in the suspension involves bigger sway bars as stated, subframe connectors, and the springs and shocks are different, they drop the car about .75" and the shocks and struts are made by tokico. Thats about all i can think of off the top of my head. But yes all the parts are swapable. If you are going to buy parts for it, they are the same as buying for a gt, except for the brakes.