C+L 73mm MAF Q

C6AE · Mar 10, 2007

I picked up one of these off ebay and it was supposed to come with 19, 30, and 36 sample tubes.
The 2 that were loose were scribed 30 (.510 dia) and 36+38 (.547 dia.). I took the third out because the MAF was filthy and it's not marked but measures .564 dia. with no other markings. I'm guessing that one's not for 19# injectors...
Anyone have one they could measure for me?
Anybody got a 19# tube they want to trade for one of these?

vristang · Mar 10, 2007

You can find the sizes here...
http://www.freewebs.com/vristang/clsampletubes.htm

C&L will tell you what 'cal' the tubes are as well.

Personally, I would not trust the scribe that is on the side of the tube.
C&L didn't scribe it (they only use the color coding), so the measurements were done by a PO.

Let us know what you find...

jason

C6AE · Mar 10, 2007

Wow, you guys are GREAT!!!
The .510 dia is red (30#)
the .564 dia is clear (19#)
The .547 dia. doesn't seem to fit the size charts referenced, but I was really just looking for the 19#
Cool

vristang · Mar 10, 2007

The size chart I have may not be a perfect match, and there is going to be some variation in the sizes C&L produces due to manufacturing.

The sizes I have listed will get you close enough to tell what the 'calibration' is.

Be sure to measure both the inlet and outlet of the sample tube, as several of them have an intended taper to the bore.

jason

C+L 73mm MAF Q

C6AE

Member

vristang

C6AE

Member

vristang

Similar threads

C+L 73mm MAF Q

C6AE

Member

vristang

C6AE

Member

vristang

Similar threads

Privacy & Transparency

Privacy & Transparency