The C&L intake will gain most power when used with cams and LT headers if you want to stay all motor, or with a centri style blower. Ford racing was supposed to come out with one also but I guess with the new 5.0 they ditched it, so did FAST, I spoke to them this past Sunday and it was scrapped too.
OK I gotta ask how come you want to get rid of it already? How long did you have it on? I'm have the Ford racing cam set already and I am going to go with a Kook's long tube set and X pipe with mufflers. What set up were u running.
Victorville?? Spent a few years at George AFB back in the late 80's and early 90's.
Sorry I'm just a youngster and lived in Vegas most of my life so I know Nellis really well!
Good choice on the cams and headers. I want to try and stay n/a with this car so those mods are in the works as well. I want to get American Racing headers with their catted H. All I have right now are muffler deletes.
There is absolutely nothing wrong with the intake at all. It has about 600 miles on it. My concern, and the reason I am selling, is that we get really dusty around here and no matter how good an aftermarket air filter may be, its still not oem in terms of keeping dust out of the engine. I could just change to one of two filters that I have been researching that meet or exceed, but then I am not sure about tunability since the intake was designed to run with a cotten gauze type filter, not nanofiber.
So after a huge duststorm and changing my spark plugs soon after and seeing how dirty everything was, probably a good 1/16-1/8in of dust all over the engine, I switched back to stock and am just running a stock performance tune. Sorry for the long response. I've been up all night working so I like to ramble when I get home...