C/m Roll Bar

Gear grabber · Jun 12, 2016

The roll bar went in the car a few weeks ago. I had the door bars set a little low so it would be easier for the old guy to get in out...and so it would not be on display.

The 2 kickers go through the floor and weld to the sub frame connectors.

Body twist is pretty much gone,body roll is another story.

Davedacarpainter · Jun 12, 2016

Nice job brother, I like the color on your car as well.

Boosted92LX · Jun 13, 2016

Davedacarpainter said:
Nice job brother, I like the color on your car as well.

I love it too. I had a roller that color, and like a big dummy I sold it.

srtthis · Jun 13, 2016

looks good man! we should be starting on mine here shortly.

Gear grabber · Jun 14, 2016

Thanks. I like the color as well...it has seen better days.

Body roll is a issue (street) i have strange S/A rear set at 5,stock rear sway bar.
Wondering if i slow the rebound on left rear if that will help ?

Boosted92LX · Jun 14, 2016

Gear grabber said:
Thanks. I like the color as well...it has seen better days.

Body roll is a issue (street) i have strange S/A rear set at 5,stock rear sway bar.
Wondering if i slow the rebound on left rear if that will help ?

Are you talking about body roll on the street going around corners, or when launching?

Gear grabber · Jun 14, 2016

Lets say while accelerating.
From a start the tires (28x11.50 QTP) will turn in to 3rd. As long as the tires are churning it stays pretty flat.
Every once in a while i find a patch of pavement that can stick the tires on a 2nd gear stomp,then the body rolls fairly hard to the right.

Boosted92LX · Jun 14, 2016

Gear grabber said:
Lets say while accelerating.
From a start the tires (28x11.50 QTP) will turn in to 3rd. As long as the tires are churning it stays pretty flat.
Every once in a while i find a patch of pavement that can stick the tires on a 2nd gear stomp,then the body rolls fairly hard to the right.

Sounds like a typical foxbody with loose drag suspension. Did you recently purchase this car?? If you aren't going to run it at the track you might want to make some changes.

Gear grabber · Jun 14, 2016

When i bought the car,the stock suspension was just plain worn out. I changed virtually everything with typical street /strip stuff (will be raced) My concern with body roll,is that it is a traction limiter.(straight line) It is a street car,but single dimensional straight line toy. Cornering is of no concern to me.

Boosted92LX · Jun 14, 2016

Gear grabber said:
When i bought the car,the stock suspension was just plain worn out. I changed virtually everything with typical street /strip stuff (will be raced) My concern with body roll,is that it is a traction limiter.(straight line) It is a street car,but single dimensional straight line toy. Cornering is of no concern to me.

Then this will do what you need. Several companies make them, UPR is the most reasonably priced. Others are Team Z and Maximum Motorsports.

https://lmr.com/item/UPR-2000/79-04-Mustag-Upr-Drag-Race-Anti-Roll-Bar

Gear grabber · Jun 15, 2016

Not convinced they hold up on the street,with both links hooked up.
Would like to hear opinions.

Boosted92LX · Jun 15, 2016

Well, you can continue to run what you have and deal with the way it behaves... On the street. Look at it this way, You build a car to basically do drag duty, yet you want to street drive it. You aren't happy with it's handling and want to change it... to better suit drag style driving. On the street. You have two options. A: change your suspension and gear it more toward street/sport driving. (This will improve body roll but slightly hurt straight line drag style driving) OR B: Go ahead with the proper equipment needed for drag style driving that is proven so well, it's replicated by several companies and used by practically all drag racers now... It's your call. Pick what you want.

For what it's worth, I've had numerous foxes setup for drag and were miserable to street drive. My latest car is more tuned to sport/road driving and i love it. Corners well, zero body roll.. Doesn't launch like a drag car, but I don't care. I don't drive it that way. It is a good all around street car.

C/m Roll Bar

Gear grabber

Well-Known Member

Davedacarpainter

Chicks can make things hard if they’re inspired...

Boosted92LX

It's only an inch or two. What's the big deal?

srtthis

the guy doing it does every local racers rear end

Gear grabber

Well-Known Member

Boosted92LX

It's only an inch or two. What's the big deal?

Gear grabber

Well-Known Member

Boosted92LX

It's only an inch or two. What's the big deal?

Gear grabber

Well-Known Member

Boosted92LX

It's only an inch or two. What's the big deal?

Gear grabber

Well-Known Member

Boosted92LX

It's only an inch or two. What's the big deal?

Similar threads

C/m Roll Bar

Well-Known Member

Chicks can make things hard if they’re inspired...

It's only an inch or two. What's the big deal?

the guy doing it does every local racers rear end

Well-Known Member

It's only an inch or two. What's the big deal?

Well-Known Member

It's only an inch or two. What's the big deal?

Well-Known Member

It's only an inch or two. What's the big deal?

Well-Known Member

It's only an inch or two. What's the big deal?

Similar threads

Privacy & Transparency

Privacy & Transparency