C4 Guys...

[srtthis]

Driver side header... does your o2 sensor hit your trans pan?

 

[MY 85 GT]

Im guessing you run long tubes?...i had the C4 but im turbo clearance was fine...lots of room under there....Im not back to an AOD still good clearance...

 

[srtthis]

yea mac long tubes. the o2 is sitting right on the trans pan

 

[84Ttop]

Can you just plug it and weld a bung in the outside of the collector?

 

[84Ttop]

PS.. I have bungs and plugs laying around if you need one

 

[srtthis]

Can you just plug it and weld a bung in the outside of the collector?

yea i could... id prefer not to but if it comes to it i can

 

[84Ttop]

Derek, do you have any pictures of how it fits now?

 

[srtthis]

nah i will try and get some this week. we are getting the new heads tonight so we will be busy getting the turbo car running... BTW it was a no go on the 245 HP's they were designed off a 4.125 bore. and we run a 4.030, so we have new castings of the 225's

 

[84Ttop]

What ever happened to the 245???

I can't belive you guys are still 4.030 bore! Can you imagine what kind of power is to be had unshroudling the valves with a bigger bore!

 

[srtthis]

yup its an off the shelf 347 set up... kinda

 

[84Ttop]

Kinda, lol

 

[srtthis]

Kinda, lol

its got an off the shelf ross piston off the shelf eagle crank and a set of GRP billet rods lol

 

[srtthis]

alright im pulling it out this week and dropping it off to have a 2nd put on the other side

 

[84Ttop]

You can't do it while it's in the car?

 

[srtthis]

me and welding dont mix

 

[A5literMan]

You and me both! At least I have a buddy that does it for a living. But that just reinforces how bad I am!