C4 Swap

F

FordGuy88

New Member

Nov 15, 2004

241

0

0

Park Ridge, IL

Dec 12, 2007

#1

• Dec 12, 2007

• #1

I was wondering what is involved in swaping out an AOD and putting in a C4? I know you need a different flex plate. The trans and the converter. The doubble hump cross member will work from the AOD and the stock drive shaft will work too. Shifer and shifter cable. But is there any thing else?

Thanks,
Dave

 

goodfastncheap

Member

Dec 25, 2006

100

0

17

Bellevue, NE

Dec 12, 2007

#2

• Dec 12, 2007

• #2

I am acquiring parts to do the exact same swap into my '89 and I found this to be very helpful (even though the article is for C4 -> AOD):

http://www.mustangfaqs.com/FAQ/1st_..._C4_transmission_to_an_AOD_in_a_1971_Mustang?

It looks as though you named pretty much every part required except the block plate and possibly cooler line adapter fittings. Wiring looks straightforward.

Hopefully someone who has actually made the swap can post to identify other issues.

-------------------------------------------------------------

Distortion 5.0 said:

I will be the final owner of this car, no matter the outcome. Cars do not escape my grip alive.

Click to expand...

 

PUNISHER RACING

Active Member

Aug 27, 2007

1,124

0

36

FORD CITY, PA.

Dec 12, 2007

#3

• Dec 12, 2007

• #3

If you have a 164 tooth bellhousing on your C4 that AOD flexplate will work. You will also need to change your shifter and cable, there is a kit that switches your stock shifters detents and makes it work with a C4 I just had no luck with them in the past. So that is why I suggest this. I would suggest using an aftermarket cooler if a bigger convertor is being installed if not get some fittings and rubber line and connect to your factory cooler lines.

 

F

FordGuy88

New Member

Nov 15, 2004

241

0

0

Park Ridge, IL

Dec 13, 2007

#4

• Dec 13, 2007

• #4

Thanks guys.

 

jtfairlane

New Member

Mar 5, 2006

468

3

0

Dec 13, 2007

#5

• Dec 13, 2007

• #5

Also don't forget that the C-4 doesn't use a TV cable, and will require an intake vacuum source for the vacuum modulator.