CAI question

  • Sponsors (?)


be creative. You can buy ABS plastic from any hardware store same with rubber plumbing cuplinks. So buy some 90* angle peices and some straight ones all in 3" - 3.5" and go to town cut as necesary and mock up a plate to bolt to the fenderwell put your K&N cone filter inside your fender and voila. Kev's home made cold air intake kit. Ready to out perform most anything on the market today :D
 
Just get some 3 inch exhaust tubing from your local exhaust shop. Get them to give you a section that has a couple of bends in it and find some hosing from Canadian Tire or a similiar place. You should be able to make that work. If you can find mandrel bent stainless steel you can polish it up to near chrome like.
 
NO! :D Use plastic! it does not transfer heat like metal. It will keep your air charge cooler and as we all know cooler air = more power. But on the flip side it will never look like chrome ;) but I supose you could paint it....